User's Manual

Chapter 1 – Introduction
Copyright
©
2002 Intel Corporation
6
Internet Off - there is no Internet connection between
the gateway and the cable modem. Verify that
one end of the Ethernet cable is securely
attached to the Internet port on the gateway
and the other end of the Ethernet cable is
securely attached to your cable modem. (Refer
to your Installation Guide for more information.)
Green solid - the gateway is connected to your
cable modem, set to a data rate of 10 Mbps,
but no traffic is being passed.
Green blinking - the gateway is connected to
your cable modem and traffic is being passed
at 10 Mbps.
Amber solid - the gateway is connected to your
cable modem, set to a data rate of 100 Mbps,
but no traffic is being passed.
Amber blinking - the gateway is connected to
your cable modem and traffic is being passed
at 100 Mbps.
Security Green solid - The Firewall Settings Security
Level is set to: Normal, High, or Very High.
Red solid - The Firewall Settings Security Level
is set to: Enable Troubleshooting Mode (via the
Firewall Settings Advanced button).
Yellow blinking - A user, that is not allowed
access to your wireless network (via Advanced
> Wireless Security), is attempting to connect
to the gateway.