User's Manual

Chapter 1 – Introduction
Copyright
©
2002 Intel Corporation
5
Power Normally this light is on. If it is not on, check
that the power cable connectors are securely in
place.
System Green blinking - The gateway is operating
correctly.
Yellow blinking - The gateway is operating
correctly but has detected another DHCP
server connected to one of the four Ethernet
connectors. Disconnect each Ethernet cable,
one at a time, until the system returns to green
blinking. Change the PC you've identified as a
DHCP server to a DHCP client. (See the
Troubleshooting chapter for instructions.)
If this LED is not blinking, the system is not
operating correctly. See Chapter 5 for
troubleshooting information.