Product Guide

Updating the BIOS

5. Remove the processor from the protective processor cover. Hold the processor only

at the edges, being careful not to touch the bottom of the processor (Figure 10).

Do not discard the protective processor cover. If the processor is removed from the

socket, always replace the processor cover.

Figure 10. Remove the Processor from the Protective Processor Cover

6. Hold the processor with your thumb and index finger oriented as shown in

Figure 11. Make sure your fingers align to the socket cutouts (Figure 11, A). Align

notches (Figure 11, B) with the posts on the socket (Figure 11, C). Lower the

processor straight down without tilting or sliding it in the socket.

Figure 11. Install the Processor