Operating Manual FUJITSU Tablet STYLISTIC Q50 System
Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "AskFujitsu@us.fujitsu.com" Copyright © 201 Fujitsu America, Inc.
FUJITSU Tablet STYLISTIC Q50 Operating Manual Declarations of conformity 7 Fujitsu Contact Information 8 Notational conventions 9 Ports and controls 10 Important notes 13 First-time setup of your device 18 Working with the Tablet PC 22 Accessories for your Tablet PC (optional) 45 Security functions 61 Connecting external devices 67 Settings in BIOS Setup Utility 72 Troubleshooting and tips 75 Technical data 82 Manufacturer’s notes 87 FCC and IC Regulatory Information 90 Canad
Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
Contents Contents Declarations of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Ports and controls . . . . . . .
Contents Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Con¿guring WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Further information on WLAN and Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Access via 4G / LTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Executing a reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Forced shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Execute a complete reset: Reset BIOS Setup to the standard values . . . . . . . . . . . . . . . . . . . . 76 Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Avis pour le Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 94 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Declarations of conformity Declarations of conformity DeclarationofConformity DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu America, Inc. Address: 1250 E. Arques Avenue Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product: Base Model Configuration: STYLISTIC Q50 Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules.
Fujitsu Contact Information Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways: • • Toll free phone: 1-800-8Fujitsu (1-800-838-5487) Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.
Notational conventions Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information which is required to use the device properly.
Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarize yourself with these items before you start to work with the device.
Ports and controls Left side 1 2 3 4 5 6 7 1 = Tether eyelet 2 = Combined headphones and microphone port (audio combo jack) 3 = Combined SIM card slot and microSD slot (protected by cover) 4 = USB 3.0 port (protected by cover) 5 = USB 3.1 port Gen 1 port with charging function (USB Type C; protected by the cover) 6 = Battery charging indicator 7 = DC input connector (DC IN, protected by cover) = )RUFHG VKXWGRZQ EXWWRQ Right side 1 1 = 7HWKHU H\HOHW Fujitsu 11
Ports and controls Rear Screw holes for securing accessories are device-dependent.
Important notes Important notes Notes Importantnotes This chapter contains essential safety information which must be followed when working with your Tablet PC. The other notes provide useful information about your Tablet PC. Safety instructions Information, Safetyinformation Please observe the following safety information. Please pay special attention to the sections in the manual marked with the symbol on the left.
Important notes Additional safety notes for devices with wireless components Wireless LAN Bluetooth,Safetynotes components If a radio component (Wireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, you must be sure to observe the following safety precautions concerning your Tablet PC: • • • Switch off the wireless components when you are in an aircraft or driving in a car. Switch off the wireless components when you are in a hospital, an operating room or near a medical electronics system.
Important notes Traveling with your Tablet PC Mobile operation TabletPC Transportation Notes Please follow the instructions below when traveling with your Tablet PC. Before you travel Ź Backup any important data that is saved on your hard disk. Ź Switch off the radio component for data security reasons. With data traf¿c via a wireless connection, it is also possible for unauthorized third parties to receive data.
Important notes Transporting the Tablet PC Protect the Tablet PC from severe shocks and extreme temperatures (e.g. direct sunlight in a car). • • • Ź Ź Ź Ź 16 Do not transport your Tablet PC while it is turned on. Carry your Tablet PC with you while traveling. Do not check it in as baggage. Never put your Tablet PC through a metal detector. Have it hand-inspected by security personnel. You can however put your Tablet PC through a properly tuned X-ray machine.
Important notes Cleaning the Tablet PC • • • • • • Do not clean any interior parts yourself; leave this job to a service technician. Only use detergents designed for computers. Normal household cleaners and polishes can damage the labels on the keyboard and the Tablet PC, the paintwork or the Tablet PC itself. Never use ammonia, acidic, or alkaline cleaners or organic chemicals such as paint thinner, acetone or kerosene as these may damage surface ¿nishes and the coating of the LCD screen.
First-time setup of your device First-time setup of your device Gettingstarted First-timesetup Please read the chapter "Important notes", Page 13. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before switching it on for the ¿rst time, connect the device to the AC voltage using the AC adapter, see "Connecting the AC adapter", Page 19.
First-time setup of your device Choose a location ACadapter Setup Choosealocation Choose a suitable location for the device before setting it up. In doing so, please follow these instructions: • Never place the device or the AC adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can result in damage caused by overheating. The back of the device heats up during normal operation.
First-time setup of your device Switching on the device for the first time Switchingon for the¿rsttime To make it easier to use your device for the ¿rst time, the operating system is pre-installed on the hard disk. 1 2 Ź Press the ON/OFF button (2) for about one second to switch the device on. The power-on indicator (1) illuminates when the device is switched on. Ź During the installation process, follow the on-screen instructions.
First-time setup of your device Installing Bonus Apps BonusApps The Fujitsu Bonus Apps utility can be accessed via the Start menu. Ź Ź Ź Ź Ź In the Start menu, click on Fujitsu Extras. Double-click on the Application folder. Double-click on the shortcut Fujitsu BonusApps. In the dialog box User Account Control by clicking Yes con¿rm you wish to enter Fujitsu Bonus Apps. Select the applications you wish to install by selecting the checkbox adjacent to your selection.
Working with the Tablet PC Working with the Tablet PC Tablet Tablet,operation This chapter describes the basics for operating your Tablet PC. You can ¿nd instructions on how to connect external devices (e.g. mouse, Àash storage) to the Tablet PC in the chapter "Connecting external devices", Page 67. Please refer to the notes in the chapter "Important notes", Page 13.
Working with the Tablet PC Status indicators SSytamtubsoilsndicators 6tatus indicators (1, 2, 3, 4) provide information about the statuses of the power supply, the battery and the WebCams. 1 2 3 4 No. 1 2, 3 4 Status indicator Description Power-on indicator • The indicator lights up white: The Tablet PC is switched on or in sleep mode. • The indicator is not lit up: The Tablet PC is switched off.
Working with the Tablet PC Switching the Tablet PC on Tablet:Switching on Power-onPower-onindicator 1 2 Ź Press the ON/OFF button (2) for about one second to switch the device on. For further information, see section "Switching on the device for the ¿rst time", Page 20 The power-on indicator illuminates (1) when the device is switched on.
Working with the Tablet PC Switching the Tablet PC off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. Ź Shut down the operating system correctly. Ź If the Tablet PC does not switch itself off automatically, press the ON/OFF button for approx. 5 seconds. Switchingoff or Ź The reset button (forced shutdown) is located on the left-hand side of the device, beneath the USB port (USB Type C).
Working with the Tablet PC Touchscreen Notes Touchscreen If the Tablet PC is connected to the optional keyboard cover and is in Clamshell mode or if the Tablet PC is connected to the optional cradle, never lift or carry the device by the LCD screen. Excessive stress can damage the LCD screen. Always lift or carry the device with both hands on the base of the keyboard or base.
Working with the Tablet PC Select display orientation (portrait or landscape format) Displayorientation Portraitformat Landscapeformat You can choose to use either portrait or landscape for the display, or whether the screen orientation should automatically adjust to the orientation of the tablet PC. You can change these settings under Control Panel - Hardware and Sound - Windows Mobility Center / Rotate screen. In the settings there are pro¿les saved for operation with different screen orientations.
Working with the Tablet PC Using the stylus Pen 1 = stylus tip 3 2 = stylus button (right mouse button) 3 = eyelet for stylus tether 2 1 You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to navigate through the programs. Programs that support handwriting recognition also allow you to write directly on the screen with the stylus. You can also use the stylus as a drawing tool.
Working with the Tablet PC Delete functions are not supported by the stylus. Action Mouse Selecting menu Click with the left mouse button. items Starting programs Double-click with the left mouse button. Moving an object Drag with the left mouse button or window pressed. Opening a context Click with the right mouse button. menu Moving the cursor Move the mouse Stylus Tap on the menu entry with the tip of the stylus. Tap on the program symbol twice in rapid succession using the stylus tip.
Working with the Tablet PC Replacing the stylus tip With use, the stylus tip may become worn or may pick up foreign particles that can scratch the screen. A damaged or worn tip may not move freely, causing unpredictable results when using the stylus. If your stylus exhibits these problems, replace the stylus tip. To do this, use the supplied tool (1). Ź To remove the tip, position it in the gap between the two ends of the tool supplied.
Working with the Tablet PC Securing the stylus Attach the stylus with a stylus tether to prevent accidentally dropping it or losing it. You device has one eyelet on the left side and one eyelet on the right side for securing the stylus tether (see "Ports and controls", Page 10). The tether eyelet on the right side is shown below. Ź Attach one end of the stylus cord to the stylus and the other end of the stylus cord to the Tablet PC.
Working with the Tablet PC Tablet buttons In addition to the ON/OFF button (1), your Tablet PC is ¿tted with three tablet buttons. 1 No.
Working with the Tablet PC Webcam Webcam Your device has two WebCams: one on the front of the device and one on the rear. The webcams have their own status indicators. The status indicators light up when the respective webcams are active. Depending on the software used, you can use your webcam to take pictures, record video clips or take part in web chats. • • • • The picture quality depends on the lighting conditions and the software being used.
Working with the Tablet PC Charging and maintaining the battery Battery The Tablet PC battery can only be charged when the ambient temperature is between 5°C / 41 °F and max. 35°C / 95°F. You can charge the battery by connecting the Tablet PC to the AC adapter (see "Connecting the AC adapter", Page 19). If the battery is running low you will hear a warning alarm. If you do not connect the AC adapter within ¿ve minutes of hearing the warning alarm, your Tablet PC will switch off automatically.
Working with the Tablet PC Using the power-saving functions Battery Power Energy The Tablet PC uses less power when the power-saving functions are enabled. You will then be able to work longer when using the battery before having to recharge it. The energy ef¿ciency is increased and environmental pollution is reduced. By choosing the best power options, you can make signi¿cant savings and at the same time help protect the environment. Ź Set the power-saving functions in your Control Panel.
Working with the Tablet PC Insert SD memory and SIM card Whether your device has a SIM card slot depends on whether you have ordered 4G functionality. With an applicable device con¿guration, the SIM card slot is located above the SD memory card slot. SD Memory cards Slot Your Tablet PC is equipped with an integrated SD memory card reader. Use SD memory cards to enlarge the storage of your Tablet PC.
Working with the Tablet PC Insert cards 1 Ź Open the SD memory and SIM card slot cover (1).
Working with the Tablet PC Inserting SD memory card 2 Ź Carefully slide the SD memory card into the upper slot (2). The label area must be facing downward. Do not apply any force, otherwise the delicate contact surfaces could be damaged. Inserting SIM card (optional) Memorycard 2 4 3 Ź Pull the SIM card carrier out of its lower slot location (2). Ź Place the SIM card (3) in the SIM card carrier as shown. Ź Slide the SIM card carrier back into its location (4).
Working with the Tablet PC 5 Ź Close the SD memory and SIM card slot cover (5).
Working with the Tablet PC Remove cards Memorycard To avoid any loss of data, always follow the correct procedure for removing the cards (see the documentation for your operating system). 1 Ź Open the SD memory and SIM card slot cover (1).
Working with the Tablet PC Removing SD memory card 2 2 3 Ź Press the edge of the SD memory card in ¿rmly and release, so that it jumps slightly out of the upper slot (2). Ź Pull the SD memory card out of the slot (3). Removing SIM card (optional) 2 4 3 Ź Remove the SIM card carrier from its location (2).
Working with the Tablet PC Ź Remove the SIM card from the SIM card carrier (3). Ź Push the SIM card carrier back into its lower mounting slot (4). 5 Ź Close the SD memory and SIM card slot cover (5).
Working with the Tablet PC Wireless LAN / Bluetooth / LTE / 4G wireless components The installation of radio components not approved by Fujitsu will invalidate the certi¿cations issued for this device. Switching the wireless components on and off The wireless components are switched on and off using the appropriate functions of the operating system. Ź To switch wireless components on and off individually, select Settings – Network & Internet – Airplane Mode.
Working with the Tablet PC Ethernet and LAN (optional, only with cradle, keyboard cover or adapter cable) EthernetLAN You can use the optionally available accessories to establish a connection to a local network (LAN = Local Area Network). Ź Connect the network cable to the LAN port of the accessory (1). Ź Connect the network cable to your network connection (2). 1 2 Your network administrator can help you to con¿gure and use the LAN connections. The network cable is not included in the delivery scope.
Accessories for your Tablet PC (optional) Accessories for your Tablet PC (optional) The following accessories are available for your Tablet PC: • Docking cradle for charging the Tablet PC with additional ports • Keyboard cover with LAN port • Protective TPU cover with shoulder strap • Folio cover • Adapter cable (USB Type-C to HDMI, USB Type-C to microHDMI, Full USB to LAN) The following sections provide more information on handling the accessories.
Accessories for your Tablet PC (optional) Your docking cradle (optional) As well as fast charging, your docking cradle is a device that also allows you to quickly connect your Tablet PC to your peripherals such as a monitor, keyboard, mouse, etc. You only need to dock the Tablet PC to be able to work with your peripheral devices. Cradle components Cradle Ports 1 2 5 3 6 7 4 8 9 1 = Dock release button 2 = Status LED 3 = Connector on the cradle for the docking port of the Tablet PC 4 = USB 3.
Accessories for your Tablet PC (optional) Setting up the cradle Select a suitable location for the cradle before setting it up. In doing so, please follow these instructions: • • • • Place the cradle on a Àat, stable, non-slippery surface. Never place the cradle or the AC adapter on a heat-sensitive surface. Do not expose the cradle to extreme environmental conditions. Protect the cradle from dust, moisture and heat.
Accessories for your Tablet PC (optional) 2 1 4 3 Ź Position the Tablet PC so that it lies against the storage surface of the cradle. Ź Push the Tablet PC onto the cradle in the direction of the arrow (1) until you feel it engage on the connector and until the slide-out position returns to its original position. Your cradle is supplied with a separate AC adapter (19 V, 4.74 A). Make sure that you only use this AC adapter for the cradle.
Accessories for your Tablet PC (optional) Disconnecting the Tablet PC from the cradle It is possible to separate the Tablet PC from the cradle while it is running. 2 1 Ź Press the slide-out button in the direction of the arrow (1) until it ¿rmly remains in pressed position (red marking visible). Ź While holding down the lower part of the cradle, lift the tablet PC from the cradle in the direction of the arrow (2).
Accessories for your Tablet PC (optional) Keyboard cover (optional) The keyboard cover is an optimized device for the convenient input of text. It only needs to be docked with the Tablet PC.
Accessories for your Tablet PC (optional) Connecting the Tablet PC to the keyboard cover Keyboardcover To prevent damage to the system, never fold the Tablet PC on the keyboard cover if the Tablet PC is in the protective TPU cover. Do not attach the optional keyboard cover to the Tablet PC and do not join both components together on the protective TPU cover. The keyboard cover and/or the tablet PC could be damaged.
Accessories for your Tablet PC (optional) Separating the Tablet PC from the keyboard cover 1 2 Ź Press the slide-out button (1) until it remains in the pressed position (red marking visible). Ź Lift the Tablet PC away from the keyboard cover in the direction of the arrow (2).
Accessories for your Tablet PC (optional) 7KLV SDJH OHIW LQWHQWLRQDOO\ EODQN Fujitsu 53
Accessories for your Tablet PC (optional) Protective TPU cover with shoulder strap (optional) Components of the protective TPU cover The protective TPU Cover accessory options package with shoulder strap contains the following components: 1. 2. 3. 4. Protective TPU cover Shoulder strap Fujitsu warranty document Accessory operating instructions The protective TPU cover with shoulder strap is not compatible with the keyboard cover and docking cradle accessory components.
Accessories for your Tablet PC (optional) Ź Pass the tether through either hole of the TPU cover and re-attach it to the tablet. 4 3 1 2 Ź Insert the tablet upper left corner (1). Ź Insert the tablet in the direction of the arrow (2) and snap it into the upper right corner (3) and the lower right side (4) of the TPU cover.
Accessories for your Tablet PC (optional) 5 Ź Install the lower left side (5) of the TPU cover onto the tablet. 6 6 a Ź If required, secure the shoulder strap (6) at two of the protective TPU cover’s four holders (a). Ź Adjust the length of the shoulder strap.
Accessories for your Tablet PC (optional) Remove the Tablet PC from the protective TPU cover Ź If attached, remove the AC plug for the AC adapter from the power outlet and the tablet. Ź Switch the Tablet PC off. Ź If attached, remove the shoulder strap. 1 2 Ź Remove the tablet from the underside of the TPU cover by removing the lower right side ¿rst (1) and then the lower left side (2).
Accessories for your Tablet PC (optional) 3 4 Ź Hold the tablet and TPU cover vertically and press the upper left side of the TPU cover (3) and move the upper right side of the tablet (4) in the direction of the arrow. Ź Once the TPU cover is removed, the tether can be un-attached from the tablet. Slide the tether out of the TPU cover hole and re-attach it to the tablet.
Accessories for your Tablet PC (optional) Folio cover (optional) The folio cover is not compatible with the keyboard cover and docking cradle accessory components. To prevent damage, do not connect the Tablet PC to these accessories. • • • • • • This folio cover contains magnets. Keep it away from objects that may be affected by the inÀuence of magnetism, e.g. pacemakers and magnetic cards. Please note that the LCD screen may be accidentally turned on when touched if the device is in its folio cover.
Accessories for your Tablet PC (optional) Adapter cable (optional) 3 adapter cables are available for your device: • • • USB Type-C to HDMI USB Type-C to microHDMI Full-USB-to-LAN: LAN Conversion Cable Kit: 1 x USB-to-LAN (GbE, limited performance) For technical speci¿cations, see chapter"Adapter cables (optional)", Page 86.
Security functions Security functions Securityfunctions Your Tablet PC has several security features that you can use to secure your system and your personal data from unauthorized access. This chapter explains how to use these functions, and what the bene¿ts are. Please remember that in some cases, for example, forgetting your password, you may be locked out of the system and unable to access your data.
Security functions Configuring the fingerprint sensor (configuration dependent) Fingerprintsensor Whether your device has a ¿ngerprint sensor or not depends on the device con¿guration which you ordered. The ¿ngerprint sensor can record the image of a ¿ngerprint. With additional ¿ngerprint software, this image can be processed and used instead of a password. 1 Ź Install the ¿ngerprint software to be able to use the ¿ngerprint sensor (1).
Security functions Using the Security Lock (docking - cradle only) Anti-theftprotection SecurityLock Your docking cradle (optional) is equipped with a Security Lock device for a Kensington Lock Cable. You can use the Kensington Lock Cable, a sturdy steel cable, to protect your docking - cradle against theft. The Kensington Lock Cable is available as an accessory. Ź Fit the Kensington Lock Cable to the attachment point on your - docking cradle.
Security functions Assigning the supervisor and user passwords Ź Start the BIOS Setup Utility and go to the Security menu. Ź Select the Set Supervisor Password ¿eld and press the Enter key. With Enter new Password: you are asked to enter a password. Ź Enter the password and press the Enter key. Confirm new Password requires you to con¿rm the password. Ź Enter the password again and press the Enter key. Changes have been saved is displayed as a con¿rmation that the new password has been saved.
Security functions Password protection for booting the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Assigning the supervisor and user passwords", Page 64), you can also prevent booting of the operating system. Operating system Activating system protection Ź Ź Ź Ź Start the BIOS Setup Utility and go to the Security menu. Select the Password on Boot option and press the Enter key.
Security functions Password protection for the hard disk Passwordprotection The hard-disk password prevents unauthorized access to the hard disk drives and is checked internally each time the system is booted. The prerequisite condition for this is that you have, as a minimum, assigned the supervisor password. Activating hard disk protection Ź Call up the BIOS Setup and select the Security menu.
Connecting external devices Connecting external devices Under all circumstances, please observe the safety notes provided in the "Important notes", Page 13 chapter before connecting or disconnecting any devices to or from your Tablet PC. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.
Connecting external devices VGA monitor port (docking cradle only) An analog monitor is connected to the analog VGA monitor port. Screen output is limited to a maximum of two screens at the same time. Monitorconnection Screenconnection VGAport Monitor Ź Switch off the Tablet PC and the external monitor. Ź Plug the data cable of the external monitor into the monitor port. Ź First switch on the external monitor and then switch on the Tablet PC.
Connecting external devices Connecting USB devices USBports On the USB ports you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect the cables of USB devices while the operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbps. USB 2.0 has a data transfer rate of up to 480 Mbps. USB 3.0 has a data transfer rate of up to 5 Gbps. USB 3.
Connecting external devices USB port with charging function (USB Type-C) USBportwithchargingfunction (USBType-C™) You can also charge a connected USB device or operate devices without an additional power supply at this USB port. This is also possible with the Tablet PC switched off, if the USB Type-C Power Delivery on System Off function is activated in the Advanced - Miscellaneous Configurations menu of the BIOS Setup Utility.
Connecting external devices Headphones/microphone/Line-In/Line-Out/headsetcombi port Connectingaudio devices Connectingheadphones Audioconnections Using the headphone/microphone/Line-In/Line-Out/headset-combi port, you can connect a headset, headphones, a microphone or external loudspeakers to your Tablet PC. Ź Connect the audio cable to the external device. Ź Connect the audio cable to the headphone port of the Tablet PC. The internal speakers are disabled.
Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility System Con¿guringhardware Con¿guringsystem Setup Con¿guration,BIOSSetupUtility settings,BIOSSetupUtility To navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard. The BIOS Setup Utility allows you to set the system functions and the hardware con¿guration for the Tablet PC. When the Tablet PC is delivered, the default settings are effective.
Settings in BIOS Setup Utility BIOS Setup Utility operation BIOS SetupUtility Press the F1 key to display help about operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. Ź Use the cursor keys ĸ or ĺ to select the menu you wish to access to make changes. The menu is displayed on the screen.
Settings in BIOS Setup Utility Exiting BIOS Setup Utility BIOS SetupUtility You need to select the desired option in the Exit menu and activate it by pressing the Enter key: Exit Saving Changes - save changes and exit BIOS Setup Utility Ź To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The Tablet PC is rebooted and the new settings come into effect.
Troubleshooting and tips Troubleshooting and tips Problem solving Fault Tips Troubleshooting If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: Ź Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. Ź Switch the Tablet PC off. Ź Please contact the Hotline/Service Desk.
Troubleshooting and tips Executing a reset If the device no longer responds to your inputs, choose one of the following options: Forced shutdown Ź Press and hold the ON/OFF button for at least 10 seconds. The device will be shut down. You can then restart it. Execute a complete reset: Reset BIOS Setup to the standard values Ź Shut down the device. Ź If the device does not respond, you may have to force the shutdown, as described above.
Troubleshooting and tips Battery charging indicator not lit Cause The battery is not being charged. Troubleshooting Ź Connect the Tablet PC to a power outlet using the AC adapter. Note: The battery will only be charged again when the battery capacity is less than 90%. The Tablet PC’s touchscreen remains dark darktouchscreen Touchscreen Cause Troubleshooting Touchscreen is switched off. Ź Press a key (external keyboard) or tap on the touchscreen.
Troubleshooting and tips The external monitor remains blank Monitor Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Troubleshooting Ź Switch the external monitor on. Ź Press a key (external keyboard) or tap on the touchscreen. Ź Adjust the brightness of the monitor. Screen output is set to the Tablet PC touchscreen.
Troubleshooting and tips Stylus input not working Cause Incorrect driver installed. Troubleshooting Ź Reinstall the driver for the "dual digitizer". The Tablet PC does not start after switch on TabletPC Cause The battery is dead. Troubleshooting Ź Charge the battery. or The AC adapter is not connected properly. Ź Connect the AC adapter to the Tablet PC. Ź Check whether the AC adapter is properly connected to the Tablet PC. Ź Switch the Tablet PC on.
Troubleshooting and tips The wireless connection to a network does not work Thewireless connectiontoanetwork does notwork Cause The wireless component is switched off. Troubleshooting Ź Switch the wireless component on (see "Switching the wireless components on and off", Page 43). The wireless component is switched on. Despite Ź Check whether the wireless connection is this, the wireless connection to a network does enabled by the software. not work.
Troubleshooting and tips Error messages on the screen Error messages onthescreen Errors This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programs are described in the documentation for these programs. If the error message appears repeatedly despite troubleshooting measures, contact the place of purchase or our customer service center.
Technical data Technical data Tablet PC General Processor ,QWHO &HOHURQ 1 3URFHVVRU 0% &DFKH XS WR *+] ,QWHO &HOHURQ 1 3URFHVVRU 0% &DFKH XS WR *+] Main memory (RQ ERDUG) *% /3''5 0+] ZLWK ,QWHO &HOHURQ 1 *% /3''5 0+] ZLWK ,QWHO &HOHURQ 1 Electrical data Safety regulations complied with Protection class Maximum power consumption (when the Tablet PC is switched on, connected to the keyboard cover and the battery is charged): Touchscreen Siz
Technical data Tablet buttons Stylus 3 keys EMR pen with pressure levels Slots Memory card slot Ports Combined headphones and microphone port Docking port USB (Universal Serial Bus) Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Transport temperature (2K2) 1 x Micro S' card (SD/SDHC/SDXC) 3.5 mm stereo mini jack 1x 1 x USB 3.0 (Type A), 1 x USB 3.1 (Gen 1) with charging function (USB Type C) 7K1 7M2 5 °C .... 35 °C / 41 °F ....
Technical data WLAN specifications Type of network Intel® -HIIHUVRQ 3HDN AC 2x2 ac/a/ b/g/b/n with integrated Bluetooth v .0, WIFi based* 2.4 GHz min. 2412, max. 2472 Transfer rate Active frequency Number of channels Security Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) 5.8 GHz min. 5180, max. 5825 (Automatic switching) IEEE802.11 a and g: 54 Mbps max. data rate; IEEE802.11n: 300 Mbps max. data rate, IEEE802.11ac: 867 Mbps max.
Technical data Rechargeable battery For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/". Rated voltage Rated capacity -cell lithium polymer battery mAh V Wh AC adapter (36 W) for the Tablet PC only (without cradle) Technicaldata Rated voltage Max. rated current 12 V 3A An additional AC adapter or AC cable can be ordered at any time.
Technical data Keyboard cover (optional) Electrical data Safety regulations complied with Protection class Ports Docking port LAN port Touchpad Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Temperature in transit CE III 7-pin 1x Yes 7K1 7M2 5 °C .... 35 °C / 41 °F .... 95 °F Protective TPU cover with shoulder strap (optional) Dimensions Width x Depth x Height 10. in. x in. x. in.
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can ¿nd information on this subject on your Tablet PC or on our website ("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/"). Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a brand new one*.
Manufacturer’s notes DOC (Industry CANADA) Notices DOC(INDUSTRYCANADA)NOTICES Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial brouilleur du Canada. UL Notice IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Only use UL Listed I.T.E.
Manufacturer’s notes ENERGY STAR Compliance Your Fujitsu system is an ENERGY STAR quali¿ed mobile PC. By choosing a computer with the latest energy-saving technology, you’re helping to preserve our environment for future generations. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S. Department of Energy, Natural Resources Canada, and other governments around the world helping us save money while protecting the environment through energy ef¿cient products and practices.
FCC and IC Regulatory Information FCC and IC Regulatory Information Please note the following regulatory information related to the wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
FCC and IC Regulatory Information Federal Communications Commission and Industry Canada statement: This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device.
FCC and IC Regulatory Information FCC Radio Frequency Exposure statement The available scienti¿c evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
FCC and IC Regulatory Information Restrictions concernant l’exportation Ce produit ou logiciel contient du code de chiffrement qui ne peut être exporté ou transféré du Canada ou des États-Unis sans un permis d’exportation du département du commerce des États-Unis. Ce matériel est conforme à la Partie 15 des règlements de la FCC, ainsi qu’à la norme ICES 003 B/NMB 003 B.
Canadian Notice / Avis pour le Canada Canadian Notice / Avis pour le Canada Canadian Notice The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725 MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in RSS-247.
Appendix Appendix Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and con¿gure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference.
Appendix Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., ¿le servers, printers, databases).
Appendix ** * * = An optional hub for a wired LAN may be required depending upon the type of access point used. ** = ADSL modem, cable modem, or similar How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Operating System that your mobile computer comes with has been pre-con¿gured to support the WLAN device.
Appendix Deactivating/Disconnecting the WLAN Device Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be disconnected in Windows using the WLAN icon in the system tray (Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though it’s not connected.
Appendix Problem Possible Cause Unavailable network connection Incorrect network name (SSID) or network key Possible Solution Ad hoc connection: verify that the network names (SSID’s) and network keys (WEP) of all computers to be connected have been con¿gured correctly. SSID’s and WEP key values must be identical on each machine. Access Point (Infrastructure) connection: set the network name (SSID) and network key to the same values as those of the access point.
Appendix Problem Possible Cause Unavailable network connection The WLAN device was (continued) deactivated or is disabled Possible Solution Check if the wireless switch is turned On. Go to Start > Control Panel, and doubleclick on Windows Mobility Center. If the wireless network is off, click the Turn wireless on button. The computer to be connected Check if the computer to be is turned off connected is turned ON. Incorrectly con¿gured network Recheck the con¿guration of settings your network settings.
Appendix Proceed as follows to change Bluetooth settings: In the Start menu search ¿eld, search for "Bluetooth Select the Bluetooth settings option (dependent on the operating system). In the Bluetooth settings window, make the desired settings. Where to Find Information About Bluetooth For additional information about Bluetooth Technology, visit the Bluetooth Web site at: "www.bluetooth.com".
Appendix Safety and hazards The WWAN module MUST BE POWERED OFF in all areas that may be susceptible to radio interference. In particular: Prohibited Areas Obey all signs and notices and follow all rules and regulations. Power off the WWAN module when instructed to do so or when you suspect that it may cause interference or danger. Where explosive atmospheres may be present Areas with a potentially explosive atmosphere are not always clearly marked.
Appendix Important safety/compliance information for North American users Unauthorized modi¿cations or changes not expressly approved by Sierra Wireless, Inc. could void compliance with regulatory rules, and thereby your authority to use this equipment. The design of the WWAN module complies with U.S.
Appendix Image Backup and Recovery Procedures Windows 10 Procedures It is very important that you create your Recovery Drive before beginning to use your system. It is also important that you create a backup of the content of C:\Drivers on your system to writable media or an external drive. System-specific software drivers are also available for download through the Fujitsu support site. Note: Most of the information below comes from the Microsoft® page "http://windows.microsoft.
Appendix create a restore point manually. Restoring won’t affect your personal ¿les, but it will remove apps, drivers, and updates installed after the restore point was made. 1. Once you have updated the RS2, click on the start button with the right-hand mouse button (or press and hold it) and then select Control Panel. 2. Search Control Panel for Recovery. 3. Select Recovery - Open System Restore - Next. 4.
Appendix 1. 2. 3. 4. Power on your system. When the Fujitsu logo appears on the screen, press the F12 key. Insert the bootable disc in your DVD drive. Highlight the CD/DVD option from the Boot Menu and press Enter . Follow the on-screen instructions to restore the image. • Select the language. • At the Windows Setup dialog window, enter your OS, language and other preferences and click Next to continue. • Click Install now to proceed with reinstalling Windows.
Appendix Downloading driver updates To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download the most current drivers, utilities and applications to determine whether you have the latest versions. To download the FSDM utility, go to the support site: "http://support.fujitsupc.
Index Index A AC adapter connecting 19 Set up 19 Anti-theft protection 63 Audio connections 71 E Ending energy saving mode 79 Energy Energy saving 14 power-saving functions 35 Error messages on the screen 81 Errors Screen messages 81 Ethernet LAN 44 B Battery 33 battery charge 35 Caring for and maintaining 34 charge level 34 Charging 34 Discharges too quickly 80 see Rechargeable battery 33 Self-discharge 34 Service life 33 Storage 34 battery charge meter 34 BIOS Setup Utility , protecting with password 6
Index Memory card handling 36 inserting 38 removing 40 Mobile operation 15 Monitor connection 68 no image 78 remains blank 78 unstable image 78 Monitor connection see VGA port 68 N Notes 13 disposal / recycling Energy saving 14 touchscreen 26 Transport 15 87 O Operating system activating system protection 65 cancel system protection 65 Protecting with password 65 P Packaging 18 Password changing 64 entering 64 removing 64 Password protection 63 hard disk 66 Pen 28 Portrait format display 27 Ports 46 Keyb
Index Touchscreen cleaning 17 dif¿cult to read 77 notes 26 reÀected glare 77 remains dark 77 Transport Damage during transportation Transportation 15 Travel, Tablet PC 15 Troubleshooting 75 change 64 entering 64 removing 64 V VGA port 18 U USB port with charging function (USB Type-C™) 70 USB ports 69 User password 110 68 W Webcam 33 Winter time 76 Wireless components Safety notes 14 Wireless LAN Safety notes 14 Wrong date/time 76 Fujitsu
