Operating Manual
Table Of Contents
- FUJITSU LIFEBOOK T938
- Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Opening the notebook
- Switching the notebook on
- Different ways to use your notebook
- Switching off the notebook
- Closing the notebook
- Handwriting recognition
- LCD screen
- Using the device as a Tablet PC
- Using the device as a notebook
- Keyboard
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Speaker and microphone
- SIM card
- Optional wireless LAN / Bluetooth / 4G wireless components
- Ethernet and LAN
- Your USB Type-C dock (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Help if problems occur
- In the event you need to recover your system
- The notebook's date or time is incorrect
- Battery indicator does not illuminate
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen of the notebook is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the stylus movements
- Stylus input not working
- The notebook does not start after switching it on
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Smart Card reader is not recognized
- Smart Card PIN forgotten
- Smart Card lost
- User and/or supervisor SmartCard lost
- Acoustic warning
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- FCC and IC Regulatory Information
- Regulatory Notes and Statements
- Wireless LAN, Health and Authorization for use
- Regulatory Information/Disclaimers
- Federal Communications Commission statement and Industry Canada statement:
- Déclaration d’Industrie Canada
- FCC Interference Statement
- FCC Radio Frequency Exposure statement
- Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences
- Export restrictions
- Restrictions concernant l’exportation
- Regulatory Notes and Statements
- Canadian Notice / Avis pour le Canada
- Appendix
- Index
Connecting external d evices
USBportwithchargingfunction(USBType-C)
USBportwithchargingfunction(USBType-C)
At this USB port, you can charge a connected USB device or operate devices w ithout
an additional power supply (e.g. a monitor or printer).
This is also possible with the notebook switched off, if the USB Type-C Power Delivery
on System-Off function is activated in the Advanced - Miscellaneous Configurations menu
of the BIOS Setup Utility. C alling up an d using the BIOS Setup Utility is described
in section "
Settings in BIOS Setup Utility", Page 86.
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
Additional information can be found in the documentation for the USB devices.
USB 3.1 Gen 1 has a data transfer rate of up to 5 Gbps.
USB 3.1 Gen 2 h as a data transfer rate of up to 10 G bps.
+
► Connect the data cable to the
external device.
► Connect the data c able to a USB port
(USB Type-C) on the notebook.
74 Fujitsu