Operating Manual
Table Of Contents
- FUJITSU LIFEBOOK T938
- Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Opening the notebook
- Switching the notebook on
- Different ways to use your notebook
- Switching off the notebook
- Closing the notebook
- Handwriting recognition
- LCD screen
- Using the device as a Tablet PC
- Using the device as a notebook
- Keyboard
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Speaker and microphone
- SIM card
- Optional wireless LAN / Bluetooth / 4G wireless components
- Ethernet and LAN
- Your USB Type-C dock (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Help if problems occur
- In the event you need to recover your system
- The notebook's date or time is incorrect
- Battery indicator does not illuminate
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen of the notebook is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the stylus movements
- Stylus input not working
- The notebook does not start after switching it on
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Smart Card reader is not recognized
- Smart Card PIN forgotten
- Smart Card lost
- User and/or supervisor SmartCard lost
- Acoustic warning
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- FCC and IC Regulatory Information
- Regulatory Notes and Statements
- Wireless LAN, Health and Authorization for use
- Regulatory Information/Disclaimers
- Federal Communications Commission statement and Industry Canada statement:
- Déclaration d’Industrie Canada
- FCC Interference Statement
- FCC Radio Frequency Exposure statement
- Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences
- Export restrictions
- Restrictions concernant l’exportation
- Regulatory Notes and Statements
- Canadian Notice / Avis pour le Canada
- Appendix
- Index
Working with t he notebook
Setting up the dock
Select a suitable location for the dock before setting it up. In doing
so, please follow these instructions:
• Never place the dock on a soft surface (e.g. carp eting, upholstered furniture , bed). This
can blo ck the air vents of the notebook and cause overheating and damage.
• Placethedockonastable,flat and anti-slip surface. Please note that the
rubber feet may mark certain types of surface s.
• Never place the dock and the AC adapter on a heat-sensitive surface.
• Do not expose the dock to extreme environmental conditions.
Protect the do ck fro m dust, humidity and heat.
Connecting the AC adapter to the dock
3
1
2
► Connect the AC cable to the AC adapter (1).
► Plug the AC cable into the powe r outlet (2).
► Connect the AC adapter cable to t he DC
jack (DC IN) of the dock (3).
When the notebook is connected to a dock, the op erating system creates a
hardware profile for the "Docked" mode. I n this profile, for example, the monitor
which was last used for output is saved as a setting. This profile will be loaded
as soon as the notebook is connected to a dock of the same type.
Fujitsu 61