Operating Manual

Removing and installing components
during servicing
Ź Pull the M.2 module out of the slot on the ma inboard in the direction of
the arrow (2) and remove it from the c asing.
Ź Fasten the cover again, see "
Attaching the cover", Page 84
Installing the M.2 module
Ź Remove the cover, see "Rem
ove the cover", Page 78
2
1
2
Ź Position the M .2 module in the slot on the mainboard at a slight angle,
in the direction of the arrow (1).
Ź Secure the M.2 module in its location w ith the screw (2).
Fujitsu 83