Operating Manual

Removing and ins tallin g components
during servicing
Removing and installing compo
nents
during servicing
Only q uali¿ed technicians should repair your notebo ok. Unauthorized
opening or incorrect repair may greatly endanger the user (electric shock,
¿re risk) and will invalidate your warranty.
Components
Incaseofservice
You may remove and install the components described in this chapter yourself
after consulting the Hotline/Service Desk.
If you remove and install compone nts without consulting the Hotline/Service
Desk, then the warranty of your notebook will be voided.
Notes on installing and removing boards
and components
• Switch off your notebook and remove the AC plug from the power outlet.
• Always remove the battery.
• Take care when you use th e locking mechanisms for the battery and an y other compon ent.
• Never use sharp objects such as screwdrivers, scissors or knives as a lever to remove covers.
Instructio nsBoardsESD
Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.
When handling b oards ¿tted with ESDs, you must always observe the following
points:
• You must always discharge static build up (e.g. by touching a grounded
object) before working with boards.
• The equipment and to ols you use must be free of static charge.
• Remove the AC plug from the power outlet before inserting or removing
boards.
• Always hold boards by their edges.
• Never touch connector pins or conductors on the board.
76 Fujitsu