Operating Manual

First-time setup of your device

Choosealocation

Choosea locationSetupAC adapter

Choose a suitable location for the device before setting it u p. In doing

so, please follow these instructions:

• Never place the device or the AC adapter on a heat-sensitive surface.

The surface could be damaged as a result.

• Never place the device on a soft surface ( e.g. carpeting, upholstered furniture,

bed). This can block the air vents and cause overheating and damage.

• The u nderside of the device heats up during normal operation. Prolonged con tact

with the skin can become unpleasant or even result in burns.

• Place the device on a stable, Àat, non-slippery surface. Please note that the

rubber feet of the device m ay mark certain types of delicate surfaces.

• Keep other objects at least 100 mm / 3.94 inches away fro m the device

and its AC adapter to ensure adequate ventilation.

• Never cover the ventilation openings of the device.

• Do not expose the device to extreme environmental conditions.

Protect the device against dust, humidity and hea t.

Connecting the AC adapter

MakingreadytouseACadapter

Observe the safety notes in the enclosed "Safety/Regulations" manual.

The supplied AC cable conforms to the requirements o f the country in which

you purchased your device. Make sure that the AC cable is approved for

useinthecountryinwhichyouintendtouseit.

Ź Connect the AC cable (1) to the AC adapter.

Ź Plug the AC cable (2) into a power outlet.

Ź Connect the AC adapter cable (3) to the

DC jack (DC IN) of the device.

Fujitsu 21