Operating Manual
Table Of Contents
- FUJITSU LIFEBOOK U938
- Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching the notebook on
- Switching the notebook off
- Keyboard
- Touchpad and touchpad buttons
- Touchscreen/LCD screen without touch function (device-dependent)
- Webcam
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Speaker and microphones
- Wireless€LAN/Bluetooth wireless components
- Ethernet and LAN
- Your USB Type-C dock (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Help if problems occur
- Reset by switching the battery off
- If you need to restore your system
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen of the notebook is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook does not start after switching it on
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- Smart Card reader is not recognized
- Smart Card PIN forgotten
- Smart Card lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Appendix
- Index
- Blank Page
Connecting external devices
Connecting an external monitor to the dock
An analog monitor is connected to the analog external monitor port (VGA) and a digital monitor to
the Display Port on the o ption al dock. The display output is limited to a maximum of two monitors at
thesametime(see"
Hot keys", Page 24, the section on "To ggling the display output").
MonitorVGAsocketMonito rportMonitorp ort
Analog external monitor port (VGA) (on the
optional dock)
Digital Display Port (on the o ptional dock)
► Switch off the not
ebook a nd the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on
the external monitor and then the notebook.
You can also swi
tch back and forth between the external monitor and the LCD
screen of the n
otebook, see chapter "
Hot keys", Page 24.
You c an displa
y the same picture o n the external monitor and the
notebook LCD s
creen simultaneously.
Fujitsu 49