Service Guide

Hardware Installations and Upgrades
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 77
5. Remove the Intel® I/O Expansion Module cable installed on the I/O expansion slot (see letter B).
6. Remove the Intel® I/O Expansion Module from the AXXMIOKIT bracket. (see letter C).
7. Remove the Intel® I/O Expansion Module cable installed on the I/O Expansion Module (see letter
D).
Figure 103. Removing the Intel
®
I/O Expansion Module
Installing and Removing the Intel
®
SAS RAID Module
Installing the Intel
®
SAS RAID Module
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Install the stand offs.
5. Install and fix the Intel® SAS RAID module to the board SAS Module connector.