Service Guide

Hardware Installations and Upgrades
22 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Removing and Installing the Chassis Cover
Removing the Chassis Cover
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR family must be
operated with the top cover in place to ensure proper cooling. You will need to remove the top
cover to add or replace components inside the platform. Before removing the top cover, power
down the server and unplug all peripheral devices and the AC power cable.
/
NOTE
A non-skid surface or a stop behind the chassis may be needed to prevent the chassis from slding on your
work surface.
1. Observe the safety and ESD precautions at the beginning of this book.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the screws (see letter A).
5. Slide the side cover back (see letter B) and lift the cover outward to remove it.
Figure 20. Removing the Chassis Cover
Installing the Chassis Cover
1. Slide the chassis cover on the chassis (see letter A).
2. Latch the cover securely to the chassis.
3. Secure the chassis cover with the screws (see letter B).