Intel® Carrier Grade Server TIGH2U Configuration Guide System / Spares / Accessories List March 2008 Rev 1.
March 2008 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
Document Table of Contents I. INTRODUCTION........................................................................................................ 4 II. PRODUCTION SKUS.................................................................................................. 5 III. PRODUCTION SPARES/ACCESSORIES LIST ......................................................... 10 APPENDIX A. RACK MOUNTING OPTIONS FOR 1U AND 2U INTEL® COMMUNICATIONS RACK MOUNT SERVERS...............................................
I. Introduction Product Description: The Intel® Carrier Grade Server TIGH2U is the 4th generation of the 2U x 20”D Intel® Telecom and Industrial Grade Rack Server. The TIGH2U supports the 45nm Quad-Core Intel® Xeon® processor 5400 Series with 12M L2 cache, coupling high performance with power efficiency to provide improved performance-per-watt over previous-generation rack-mount servers.
II. Production SKUs The TIGH2U Production SKUs that can be ordered are listed below: PID Order Code Description MM# Min. Order Qty. TLHA0201W Intel® Carrier Grade Server TIGH2U Base Model 0 with AC Power Supply. 890868 1 TLHD0201W Intel® Carrier Grade Server TIGH2U Base Model 0 with DC Power Supply. 890910 1 See the TIGH2U Base Model 0 Configuration table further down in this section for a list of components included in each base model 0 SKU.
TIGH2U Base Model 0 Configuration All Production SKUs are base model 0 SKUs (no CPU, heatsink, memory, hard drive or plug-in adapters are provided). Those components must be ordered separately as Accessories from Intel or from third party vendors listed in the Tested Hardware and Operating System List (THOL). The below table lists how many of each component is included in the Production model 0 SKU.
Notes on the TIGH2U Model 0 Configuration and Options: PCI Risers o The base configuration comes standard with two PCI Risers supporting up to five PCI slots. These include: One low-profile riser supporting two PCI-Express (PCIe) slots One full-height, full-length riser supporting three slots: two PCIe x4 and one PCI-X. o Additional full-height, full-length risers (below) are supported and available as accessories (refer to “Production Spares/Accessories List” in section III).
IO Option Modules o These modules, available as optional accessories, attach to the system board via a proprietary connector, and provide additional IO through the rear bulkhead. The AXXGBIOMO option module provides two Gigabit Ethernet NICs. The AXXSASIOMOD option module provides one x4 external SAS port. o Note: Using the AXXGBIOMOD on the TIGH2U may result in non-compliance of NEBS GR-63 short term operating conditions. o For ordering details, refer to “Production Spares/Accessories List” in section III.
Details on Ordering of Processors: The TIGH2U supports the Quad-Core Intel® Xeon® processor 5400 Series. Ordering details for the CPUs for use in TIGH2U are listed below, and includes both Tray (for OEMs) and Boxed (Retail channel) processors. Quad-Core Intel® Xeon® Processors Supported by TIGH2U: Processor Number E5440 Long Life Yes Cores Quad Speed 2.
III. Production Spares/Accessories List Below are the Spares parts and Accessories that may be ordered with the TIGH2U system. Any of these parts may be ordered as spares for part replacement purposes or as additional customer inventory. Some of the parts below are not included in the TIGH2U system base model and may be ordered as accessories for purposes of upgrading the base model to include additional features.
Production Spares/Accessories List (continued) PID Order Code Contents Description Included in Base Model (Y/N) MM# Min.
Production Spares/Accessories List (continued) PID Order Code Description Contents Included in Base Model (Y/N) MM# Min.
Appendix A. Rack Mounting Options for 1U and 2U Intel® Communications Rack Mount Servers Rack mounting kits for 2-post or 4-post, 19-inch or 23-inch racks are offered for this product. Please refer to the tables below for the correct options to suit your needs. All rack mount kits listed are suitable for 1U and 2U Intel® Communications Rack Mount Servers. Installation instructions are included in each kit.
TMLCMOUNT21 The TMLCMOUNT21 kit mounts Intel® Communication Rack Mount Servers to a 2-post, central office type, 19” wide rack. This kit consists of simple L-shaped brackets; which fasten to the sides of the server and to the rack. TMLCMOUNT21 3/28/2008 v 1.
TMLPMOUNT41, TMLPMOUNT51 and TMLPMOUNT52 TMLPMOUNT41/51/52 series mounts Intel® Communication Rack Mount Servers to 2post or 4-post racks. TMLPMOUNT41 and TMLPMOUNT51 are used for mounting servers on 19” wide racks. These racks are considered standard EIA (universal hole spacing) racks. TMLPMOUNT52 is used for mounting servers on 23” wide racks. These racks could be standard EIA (universal or wide hole spacing) or ETSI (European) racks. TMLPMOUNT41/51/52 series are designed with a slide-in rail-type system.
4. EIA-Wide spacing doesn't have the interstitial hole that is present in EIAUniversal. TMLPMOUNT51 contains an adapter bracket to overcome this EIAWide issue. 5. This component (2U Nut Bar) enables installation of a rail kit into a 1U rack slot when there is already equipment installed both above and below that open slot. 6. The sides of the server must be accessible when using TMLPMOUNT41 in 2-post racks. 3/28/2008 v 1.
The diagrams above summarize the components and “slide-in rail-type” system of the TMLPMOUNT41. It can be adapted for a 2-post or 4-post installation. 3/28/2008 v 1.
The main difference between the TMLPMOUNT41 and TMLPMOUNT51/52 series is that the TMLPMOUNT41 series uses a screw to lock the server in place via the Universal Mounting Bracket, whilst the TMLPMOUNT51/52 series has an additional Slide Pull-Out Locking feature. The Universal Front Mounting Bracket on the TMLPMOUNT41 The Slide Pull-Out Locking feature on the TMLPMOUNT51/52 3/28/2008 v 1.
TMLPSLIDE01 The TMLPSLIDE01 is an accessory kit designed for use in conjunction with slide rails to produce a rack mounted serviceable server. The TMLPSLIDE01 kit contains two Universal Front Mounting Brackets that secure the server to the front of the rack. The sliding rails and optional mounting brackets required to mount the server must be purchased through the channel. For example, the Accuride 22-inch Model 305A-LR slide rails are designed to mount a server for “in-rack service.
Although these mounts have been designed for industry standard racks, please consult with your Intel Field Application or Sales Engineer before selecting racks for these servers. Compatible rack mounting kits may also be obtained from 3rd party suppliers. 3/28/2008 v 1.
