Datasheet

Intel® Solid-State Drive Pro 2500 Series (M.2)
Product Specification October 2014
28 330902-002
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
number of sectors read by the host system. The raw
value is increased by 1 for every 65,536 sectors
(32MB) read by the host.
F9h
Total NAND Writes
Raw value reports the number of writes to NAND in
1 GB increments.
1
1
0
0
1
0
0 (none)
Table 22: SMART Attribute Status Flags
Status Flag
Description
Value = 0
Value = 1
SP
Self-preserving attribute
Not a self-preserving attribute
Self-preserving attribute
EC
Event count attribute
Not an event count attribute
Event count attribute
ER
Error rate attribute
Not an error rate attribute
Error rate attribute
PE
Performance attribute
Not a performance attribute
Performance attribute
OC
Online collection attribute
Collected only during offline
activity
Collected during both offline
and online activity
PW
Pre-fail warranty attribute
Advisory
Pre-fail
5.9 SMART Logs
Intel® SSD Pro 2500 Series implements the following Log Addresses: 00h, 02h, 03h, 06h, and 07h.
The Intel SSD Pro 2500 Series implements host vendor specific logs (addresses 80h-9Fh) as read and write
scratchpads, where the default value is zero (0). Intel SSD Pro 2500 Series does not write any specific values to
these logs unless directed by the host through the appropriate commands.
The Intel SSD Pro 2500 Series also implements a device vendor specific log at address A9h as a read-only log area
with a default value of zero (0).