Datasheet

Intel® Solid-State Drive DC S3500 Series M.2
Product Specification Addendum
 Capacity:
− 80GB, 120GB, 340GB
 Components:
− Intel® 20nm NAND Flash Memory
− Multi-Level Cell (MLC)
 Form Factor:
– Type 2280-D5-BM: 22mm x 80mm
– Z-Height 1.5mm x 1.5mm
 Read and Write IOPS
1,2
(Full LBA Range, IOMeter*
Queue Depth 32)
− Random 4KB
3
Reads: Up to 67,000 IOPS
− Random
4KB Writes:
Up to
14,500
IOPS
− Random 8KB
3
Reads: Up to 45,000 IOPS
− Random 8KB Writes: Up to 7,300 IOPS
 Bandwidth Performance
1
−
Sustained Sequential Read: Up to 470
MB/s
4
− Sustained Sequential Write: Up to 320 MB/s
 Latency (average sequential)
− Read: 50 µs (TYP)
− Write: 65 µs (TYP)
 Quality of Service
5, 6
− Read/Write: 500 µs / 5 ms (99.9%)
 AES 256-bit Encryption
 Compliance
− SATA Revision 3.0; compatible with SATA 6Gb/s, 3Gb/s
and 1.5Gb/s interface rates
− ATA-ACS2 Rev-7; includes SCT (Smart Command
Transport) and device statistics log support
− SSD-enhanced SMART ATA feature set
− Native Command Queuing (NCQ) command set
− Data set management Trim command
− SATAIO M.2 Card Format Version 11
 Altitude
7
− Operating: -1,000 to 10,000 ft
− Operating
8
: -10,000 to 15,000 ft
− Non-operating: -1,000 to 40,000 ft
 Power Management
− 3.3V Only
− SATA Interface Power Management
− Enhanced power-loss data protection
− DIPM and Hot plug/removal not Supported
 Compatibility
− Windows 7*, Windows 8*, Windows 8.1*
− Windows* Server 2012 R2*, Windows Server 2012*
− Windows* Server 2008* Enterprise 32/64bit SP2
− Windows* Server 2008* R2 SP1
− Windows* Server 2003* Enterprise 64bit SP2
− Red Hat* Enterprise Linux* 5.5, 5.6, 6.1, 6.3, 7.0
− SUSE* Linux Enterprise Server 10*, 11
SP1CentOS* 64bit 5.7, 6.3
− Intel® SSD Toolbox with Intel
®
SSD Optimizer
 Product Ecological Compliance
− RoHS*
 Power
− Active: Up to 3.8W (TYP)
− Idle: 500 mW
− Power on to Ready after planned Shutdown:
Typical 2 Sec.
 Weight: 11 grams ± 1 grams
 Temperature
− Operating: 0° C to 70° C
− Non-Operating
9
: -55° C to 95° C
− Temperature monitoring and logging
− Thermal throttling
 Shock (operating and non-operating):
1,000 G/0.5 msec
 Vibration
− Operating: 2.17 G
RMS
(5-700 Hz)
− Non-Operating
: 3.13 G
RMS
(5-800 Hz)
 Reliability
− Uncorrectable Bit Error Rate (UBER):
1 sector per 10
^17
bits read
− Mean Time Between Failures (MTBF):
2 million hours
− End-to-End data protection
 Endurance Rating
10
:
− 80GB: Up to 45TB
− 120GB: Up to 70TB
− 340GB: Up to 180TB
 Certifications and Declarations
− UL*, CE*, C-Tick*, BSMI*, KCC*, Microsoft WHCK*, VCCI*,
SATA-IO
1. Performance values vary by capacity and form factor
2. Performance specifications apply to both compressible and incompressible data
3. 4KB = 4,096 bytes; 8KB = 8,192 bytes
4.
MB/s = 1,000,000 bytes/second
5.
Based on Random 4KB QD=1 workload, measured as the time taken for 99.9 percent of commands to finish the round-trip from host to drive and back to host
6.
Measurement taken once the workload has reached steady state but including all background activities required for normal operation and data reliability
7.
Altitude pressure is simulated in a test chamber; excludes soft error
8.
Extended operation at a higher altitude might impact reliability
9. Please contact your Intel representative for details on the non-operating temperature range
10.
Based on JESD218 standard
Order number: 331061-002US