Datasheet
Intel® Solid-State Drive DC S3610 Series
Page Offset Description
Equivalent SMART
attribute (if applicable)
0x38 Lowest Average Short Term Temperature --
0x40 Highest Average Long Term Temperature --
0x48 Lowest Average Long Term Temperature --
0x50 Time in Over-Temperature --
0x58 Specified Maximum Operating Temperature --
0x60 Time in Under-Temperature --
0x68 Specified Minimum Operating Temperature --
0x06 – Transport Statistics
0x08 Number of Hardware Resets --
0x10 Number of ASR Events --
0x18 Number of Interface CRC Errors --
0x07 – Solid State Device
Statistics
0x08 Percentage Used Endurance Indicator
E9h
Note: This device
statistic counts from 1 to
150
5.6 SMART Command Transport (SCT)
With SMART Command Transport (SCT), a host can send commands and data to an SSD and receive
status and data from an SSD using standard write/read commands to manipulate two SMART Logs:
• Log Address E0h ("SCT Command/Status") — used to send commands and retrieve status
• Log Address E1h ("SCT Data Transfer") — used to transport data
Intel SSD DC S3610 supports the following standard SCT actions:
• Write Same — DC S3610 Series implements this action code as described in the ATA
specification.
• Error Recovery Control — DC S3610 Series accepts this action code, and will store and return
error-recovery time limit values.
• Feature Control - DC S3610 Series supports feature code 0001h (write cache) feature code
0002h (write cache reordering), and feature code 0003h (time interval for temperature logging).
It also supports D000h (Power Safe Write Cache capacitor test interval), D001h (read/write
power governor mode), D002h (read thermal governor mode), D003h (read power governor
burst power), and D004h (read power governor average power).
• Data table command - DC S3610 Series supports data table command as specified in
ATA8-ACS2. This will read out temperature logging information in table ID 0002h.
• Read Status Support - DC S3610 supports read status log
• SCT command 0xD801with State=0, Option=1, ID Word 106 can be used to change from
0x6003 to 0x4000 (4KB physical sector size to 512B physical sector size support change).
Product Specification March 2015
26 331342-003US