Datasheet

Intel® Solid-State Drive DC S3610 Series

Parameter Value

Insertion Cycles

50 on SATA cable

500 on backplane

SATA/power cable insertion/removal cycles.

Data Retention

3 months power-off retention once SSD

reaches rated write endurance at 40 °C

The time period for retaining data in the NAND at maximum rated

endurance.

Endurance Rating

200GB 1.8”/2.5”: Up to 1.1 PB

400GB 1.8”/2.5”: Up to 3.0 PB

480GB: Up to 3.7 PB

800GB 2.5”: Up to 5.3 PB

800GB 1.8”: Up to 4.2 PB

1.2TB: Up to 8.6 PB

1.6TB: Up to 10.7 PB

while running JESD218 standard

While running JESD218 standard

and based on JESD219 workload.

Note:

1. Refer to JESD218 standard table 1 for UBER, FFR and other Enterprise SSD endurance verification requirements. Endurance verification

acceptance criterion based on establishing <1E-16 at 60 confidence.

2.7 Temperature Sensor

The Intel SSD DC S3610 Series has an internal temperature sensor with an accuracy of +/-2C over a range of -20C to

+80C which can be monitored using two SMART attributes: Airflow Temperature (BEh) and Device Internal

Temperature (C2h).

For more information on supported SMART attributes, see “SMART Attributes” on page 20.

2.8 Power Loss Capacitor Test

The Intel SSD DC S3610 Series supports testing of the power loss capacitor, which can be monitored using the

following SMART attribute: (175, AFh).

2.9 Hot Plug Support

Hot Plug insertion and removal is supported in the presence of a proper connector and appropriate operating system

(OS), as described in the SATA 3.0 specification.

This product supports asynchronous signal recovery and issues an unsolicited COMINIT when first mated with a

powered connector to guarantee reliable detection by a host system without hardware device detection.

Product Specification March 2015

14 331342-003US