Datasheet

Intel® Solid-State Drive 730 Series
Product Specification December 2014
18 330177-003
5.3.1 SMART Attributes
Table 11 lists the SMART attributes supported by the Intel® SSD 730 Series; Table 12 lists the corresponding status
flags and threshold settings.
Table 11: SMART Attributes
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
05h
Re-allocated Sector Count
The raw value of this attribute reports the number of
retired blocks since leaving the factory (grown defect
count).
1
1
0
0
1
0
0 (none)
09h
Power-On Hours Count
The raw value reports power-on time, cumulative over
the life of the SSD, in
hour time units.
Normalized value: always 100
1
1
0
0
1
0
0 (none)
0Ch
Power Cycle Count
The raw value of this attribute reports the
cumulative number of power cycle events
over the life of the device.
1
1
0
0
1
0
0 (none)
AAh
Available Reserved Space
1
1
0
0
1
1
10
ABh
Program Fail Count
The raw value of this attribute reports total count of
program fails and the normalized value, beginning at
100, The raw value of this attribute reports the percent
remaining of allowable program fails.
1
1
0
0
1
0
0 (none)
ACh
Erase Fail Count
The raw value of this attribute shows total
count of erase fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable erase fails.
1
1
0
0
1
0
0 (none)
AEh
Unexpected Power Loss
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command
1
1
0
0
1
0
0 (none)
B7h
SATA Downshift Count
The raw value reports the number of times
the SATA interface selected lower signaling rate due to
error.
1
1
0
0
1
0
0 (none)
BBh
Uncorrectable Error Count
The raw value reports the count of errors that could not
be recovered using Error
Correction Code (ECC).
1
1
0
0
1
0
0 (none)