Datasheet

Intel
®
Solid-State Drive Pro 2500 Series (2.5-inch)
Product Specification July 2014
12 330711-001US
2.6 Reliability
The Intel SSD Pro 2500 Series meets or exceeds SSD endurance and data retention requirements as specified in
the JESD218 specification.
Table 10: Reliability Specifications
Parameter
Value
Uncorrectable Bit Error Rate (UBER)
Uncorrectable bit error rate will not exceed one sector in the specified number of bits
read. In the unlikely event of a non-recoverable read error, the SSD will report it as a
read failure to the host; the sector in error is considered corrupt and is not returned to
the host.
< 1 sector per 10
16
bits read
Mean Time Between Failures (MTBF)
Mean Time Between Failures is estimated based on Telcordia* methodology and
demonstrated through Reliability Demonstration Test (RDT).
≥ 1.2 million hours
Minimum Useful Life/Endurance Rating
The SSD will have a minimum of five years of useful life under typical client workloads
with up to 20 GB of host writes per day.
5 years
Insertion Cycles
Maximum insertion/removal cycles on 2.5-inch port
250 insertion/removal cycles
2.7 Hot Plug Support
Hot Plug insertion and removal is supported in the presence of a proper connector and appropriate operation
system, as described in the SATA 3.2 specification.
This product supports asynchronous signal recovery and issues an unsolicited COMINIT when first mated with a
powered connector to enable detection by a host system without hardware device detection.