Datasheet

Intel
®
X25-E SATA Solid State Drive
May 2009 Product Manual
Order Number: 319984-005US 9
Intel
®
X25-E SATA SSD
Drive will transition to idle power level once idle for 25 ms whether or not sleep or
standby command is received. Standby power levels assume DIPM enabled. Active
power is measured on an IOMeter workload of full bandwidth 64 K sequential writes
with queue depth 1.
3.4 Environmental Conditions
3.4.1 Temperature
Note: Measured without condensation.
3.4.2 Altitude
The drive is not sensitive to changes in altitude because it has no moving parts. Drive
tested between -1K and 40K feet.
3.4.3 Shock and Vibration
Notes:
1. Shock specifications assumes that the SSD is mounted securely with the input vibration applied to the drive mounting
screws. Stimulus may be applied in the X, Y or Z axis.Shock specification is measured as RMS value.
2. Vibration specifications assumes that the SSD is mounted securely with the input vibration applied to the drive mounting
screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is measured as RMS value.
3. Sine wave sweeping 1 oct/min.
Table 8. Temperature Related Specifications
Mode Min Typ Max Unit
Ambient Temperature
Operating 0 70
o
C
Non-Operating -55 95
o
C
Temperature Gradient
Operating 20
o
C/hr *
Non-Operating 30
o
C/hr *
Humidity
Operating 5 95 %
Non-Operating 5 95 %
Table 9. Shock and Vibration Specifications
Mode
Frequency/
Timing
Max Unit
Shock
1
Operating at 0.5 msec 1,000 G
Non-Operating at 0.5 msec 1,000 G
Vibration
2
Operating 7-800 Hz 2.17 G G
Non-Operating 10-500 Hz
3
3.13 G G