Datasheet

Intel
®
X25-E SATA SSD
Intel
®
X25-E SATA Solid State Drive
Product Manual May 2009
10 Order Number: 319984-005US
Intel
®
X25-E SATA SSD
3.4.4 Acoustics
The drive has no moving or noise-emitting parts; therefore, it produces negligible
sound (0 dB) in all modes of operation.
3.4.5 Electromagnetic Immunity
Electromagnetic Immunity tests assume the SSD is properly installed in the
representative host system. The drive will operate properly without errors or
degradation in performance when subjected to radio frequency (RF) environments
defined in the following table:
Notes:
1. Performance Criteria A = The device shall continue to operate as intended, i.e., normal unit operation with no
degradation of performance.
2. Performance Criteria B = The device shall continue to operate as intended after completion of the test. However, during
the test, some degradation of performance is allowed as long as there is no data loss operator intervention to restore
device function.
3. Performance Criteria C = temporary loss of function is allowed. Operator intervention is acceptable to restore device
function.
4. Electrostatic Discharge applied to drive enclosure.
3.5 Reliability
Table 10. Electromagnetic Immunity Specifications
Test Description
Performance
Criteria
Reference Standard
Electrostatic discharge Contact, HCP, VCP: ±8 kV; Air: ± 15 kV B EN 61000-4-2: 1995
Radiated RF immunity
80 to 1,000 MHz, 3 V/m,
80% AM with 1 kHz sine
900 MHz, 3 V/m, 50% pulse modulation at
200 Hz
A
EN 61000-4-3: 1996
ENV 50204: 1995
Electrical fast transient
± 1 kV on AC mains, ± 0.5 kV on external
I/O
B EN 61000-4-4: 1995
Surge immunity
± 1 kV differential, ± 2 kV common, AC
mains
B EN 61000-4-5: 1995
Conducted RF immunity
150 kHz to 80 MHz, 3 Vrms, 80% AM with 1
kHz sine
A EN 61000-4-6: 1996
Voltage dips, interrupts
0% open, 5 seconds
0% short, 5 seconds
40%, 0.10 seconds
70%, 0.01 seconds
C
C
C
B
EN 61000-4-11: 1994
Table 11. Reliability Specifications
Parameter Value
Nonrecoverable read errors (BER) 1 sector in 10
15
bits read, max
Mean Time Between Failures (MTBF) 2,000,000 hours
Power On/Off Cycles 50,000 cycles