Datasheet

Intel
®
Solid-State Drive 313 Series
February 2012 Product Specification
Order Number: 326453-001US 21
Intel
®
Solid-State Drive 313 Series
5.6 SMART Command Transport (SCT)
With SMART Command Transport (SCT), a host can send commands and data to an
SSD and receive status and data from an SSD using standard write/read commands to
manipulate two SMART Logs:
• Log Address E0h ("SCT Command/Status") — used to send commands and retrieve
status
• Log Address E1h ("SCT Data Transfer") — used to transport data
The Intel SSD 313 Series supports the following standard SCT actions:
• Write Same — Intel SSD 313 Series implements this action code as described in the
ATA specification.
• Error Recovery Control — Intel SSD 313 Series accepts this action code, and will
store and return error-recovery time limit values.
• Feature Control - Intel SSD 313 Series supports feature code 0001h (write cache)
and feature code 0002h (write cache reordering).
5.7 Data Set Management Command Set
The Intel SSD 313 Series supports the Data Set Management command set Trim
attribute, which consists of:
• DATA SET MANAGEMENT EXT
5.8 Host Protected Area Command Set
The Intel SSD 313 Series supports the Host Protected Area command set, which
consists of:
• READ NATIVE MAX ADDRESS
• SET MAX ADDRESS
• READ NATIVE MAX ADDRESS EXT
• SET MAX ADDRESS EXT
The Intel SSD 313 Series also supports the following optional commands:
• SET MAX SET PASSWORD
•SET MAX LOCK
• SET MAX FREEZE LOCK
• SET MAX UNLOCK
0x07 - Solid State Device Statistics 0x08 Percentage Used Endurance Indicator
E9h
Note: This device statistic
counts up from 0 rather than
down from 100, and may go
beyond 100 for drives that
exceed their expected lifetime.
Table 14. Device Statistics Log (Continued)
Page Offset Description
Equivalent SMART attribute
if applicable