Intel® Solid-State Drive 311 Series Product Specification Capacity: 20 GB Components: Intel® 34nm NAND Flash Memory Single-Level Cell (SLC) Form Factors: — 2.5-inch SATA Thickness: 9.5 mm Weight: up to 80 grams — Full-sized mSATA Thickness: 3.
Ordering Information L Contact your local Intel sales representative for ordering information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
Intel® Solid-State Drive 311 Series Contents 1.0 Overview ................................................................................................................... 5 2.0 Product Specifications ............................................................................................... 6 2.1 Capacity ............................................................................................................ 6 2.2 Performance ...................................................................
Intel® Solid-State Drive 311 Series Intel® Solid-State Drive 311 Series Product Specification 4 May 2011 Order Number: 325334-001US
Intel® Solid-State Drive 311 Series 1.0 Overview This document describes the specifications and capabilities of the Intel® Solid-State Drive 311 Series (Intel® SSD 311 Series).
Intel® Solid-State Drive 311 Series 2.0 Product Specifications 2.1 Capacity Table 1. User Addressable Sectors Unformatted Capacity Intel SSD 311 Series 20GB SSD Total User Addressable Sectors in LBA Mode 39,091,248 Notes: LBA count shown represents total user storage capacity and will remain the same throughout the life of the drive.
Intel® Solid-State Drive 311 Series 2.3 Electrical Table 3. Operating Voltage and Power Consumption Electrical Characteristics Operating voltage for 5 V (± 5%) Min Max Operating Voltage for 3.3 V (± 5%) Min Max Power Consumption (Typical) Active1 Idle2 Value 4.75 V 5.25 V 3.14 V 3.47 V 150 mW 75 mW Notes: 1. Active power measured during execution of MobileMark* 2007 with DIPM (Device Initiated Power Management) enabled. 2. Idle power defined as SSD at idle with DIPM enabled. 2.
Intel® Solid-State Drive 311 Series 2.5 Product Regulatory Compliance The Intel SSD 311 Series meets or exceeds the regulatory or certification requirements in Table 5. Table 5. Product Regulatory Compliance Specifications Description Region for which conformity declared European Union Low Voltage Directive (LVD) 2006/95/EC EN 60950-1 2nd edition for Information Technology Equipment Safety - Part 1: General Requirements European Union UL/CSA 60950-1, Second Edition CAN/CSA-C22.2 No.
Intel® Solid-State Drive 311 Series 2.6 Reliability The Intel SSD 311 Series meets or exceeds SSD endurance and data retention requirements as specified in the JESD218 specification. Reliability specifications are listed in Table 6. Table 6. Reliability Specifications Parameter Uncorrectable Bit Error Rate (UBER) Value 1 sector in 1016 bits read, max Uncorrectable bit error rate will not exceed one sector in the specified number of bits read.
Intel® Solid-State Drive 311 Series 3.0 Mechanical Information 3.1 2.5-inch SATA SSD Figure 1 shows the physical package information for the Intel SSD 311 Series in the 2.5-inch SATA form factor. All dimensions are in millimeters. Figure 1. 2.
Intel® Solid-State Drive 311 Series 3.2 mSATA SSD Figure 2 shows the physical package information for the Intel SSD 311 Series in the mSATA form factor. All dimensions are in millimeters. Note: Total typical thickness of the Intel SSD 311 Series is less than the standard mSATA z-height specification of 4.85 mm. Figure 2. mSATA Form Factor Dimensions 50.80 4.20 2.08 2X5.80 2X5.80 4.00 11.08 25.70 COMPONENT AREA TOP 29.85 2.00 COMPONENT KEEP OUT AREA 2 X EACH SIDE 2X 3.20 MIN 2X 5.80 2.60±0.
Intel® Solid-State Drive 311 Series 4.0 Pin and Signal Descriptions This section identifies the pin locations and signal descriptions for Intel SSD 311 Series. 4.1 2.5-inch SATA SSD Pin Locations Figure 3. SATA Signal and Power Segment Pins Signal Segment S1 Note: Power Segment P1 2.5-inch connector supports in-built latching capability. 4.2 mSATA SSD Pin Locations Figure 4.
Intel® Solid-State Drive 311 Series 4.3 Signal Descriptions 4.3.1 2.5-inch SATA SSD Signal Descriptions Table 7. SATA Connector Pin Signal Definitions Note: Pin Function Definition S1 Ground 1st mate S2 A+ S3 A- S4 Ground S5 B- S6 B+ S7 Ground Differential signal pair A 1st mate Differential signal pair B 1st mate Key and spacing separate signal and power segments. Table 8. SATA Power Pin Definitions Pin1 Function Definition P12 Not connected (3.
Intel® Solid-State Drive 311 Series 4.3.2 mSATA SSD Signal Descriptions Table 9. mSATA Connector Pin Signal Definitions Pin Function Definition P1 Reserved No Connect P2 +3.3 V 3.3 V Source P3 Reserved No Connect P4 GND Return Current Path P5 Reserved No Connect P61 +1.5 V 1.
Intel® Solid-State Drive 311 Series Table 9. mSATA Connector Pin Signal Definitions (Continued) Pin Function Definition P473 Vendor Vendor Specific / Manufacturing Pin P481 +1.5 V 1.5 V Source P49 DA/DSS Device Activity Signal / Disable Staggered Spin-up P50 GND Return Current Path P514 Presence Detection Shall be pulled to GND by device P52 +3.3 V 3.3 V Source Notes: 1. 1.5 V rail is not used on the Intel SSD 311 Series. No connect on the host side. 2.
Intel® Solid-State Drive 311 Series 5.0 Supported Command Sets The Intel SSD 311 Series supports ATA (Advanced Technology Attachment) commands described in this section. 5.
Intel® Solid-State Drive 311 Series 5.3 Security Mode Feature Set The Intel SSD 311 Series supports the Security Mode command set, which consists of: • SECURITY SET PASSWORD • SECURITY UNLOCK • SECURITY ERASE PREPARE • SECURITY ERASE UNIT • SECURITY FREEZE LOCK • SECURITY DISABLE PASSWORD 5.
Intel® Solid-State Drive 311 Series Table 10. SMART Attributes (Continued) ID Attribute Status Flags1 SP EC ER PE OC PW Threshold 0Ch Power Cycle Count The raw value of this attribute reports the cumulative number of power cycle events over the life of the device. 1 1 0 0 1 0 0 (none) B8h End-to-End Error Detection Count Reports number of errors encountered during LBA tag checks, within the SSD data path.
Intel® Solid-State Drive 311 Series 5.4.2 SMART Logs The Intel SSD 311 Series implements the following Log Addresses: 00h, 02h, 03h, 06h, and 07h. The Intel SSD 311 Series implements host vendor specific logs (addresses 80h-9Fh) as read and write scratchpads, where the default value is zero (0). The Intel SSD 311 Series does not write any specific values to these logs unless directed by the host through the appropriate commands.
Intel® Solid-State Drive 311 Series 5.8 Device Configuration Overlay Command Set The Intel SSD 311 Series supports the Device Configuration Overlay command set, which consists of: • DEVICE CONFIGURATION FREEZE LOCK • DEVICE CONFIGURATION IDENTITY • DEVICE CONFIGURATION RESTORE • DEVICE CONFIGURATION SET 5.9 General Purpose Log Command Set The Intel SSD 311 Series supports the General Purpose Log command set, which consists of: • READ LOG EXT • WRITE LOG EXT 5.
Intel® Solid-State Drive 311 Series 6.0 Certifications and Declarations Table 11 describes the Device Certifications supported by the Intel SSD 311 Series. Table 11. Device Certifications and Declarations Certification Description UL Certified Underwriters Laboratories, Inc. Component Recognition UL60950-1. CE Compliant Indicates conformity with the essential health and safety requirements set out in European Directives Low Voltage Directive and EMC Directive.
Intel® Solid-State Drive 311 Series 8.0 Additional Product Information For additional information about the Intel SSD 311 Series, see the documentation in Table 13. Table 13. Related Documentation Order Number 325502 9.0 Title Intel® Solid-State Drive 311 Series Product Brief Terms and Acronyms Table 14 defines the terms and acronyms used in this document. Table 14.
Intel® Solid-State Drive 311 Series Table 14. Glossary of Terms and Acronyms (Continued) Term Definition UBER Uncorrectable Bit Error Rate 10.0 Revision History Date Revision May 2011 001 May 2011 Order Number: 325334-001US Description Initial release.
Intel® Solid-State Drive 311 Series Appendix A IDENTIFY DEVICE Command Data Table 15 details the sector data returned after issuing an IDENTIFY DEVICE command. Table 15.
Intel® Solid-State Drive 311 Series Table 15.
Intel® Solid-State Drive 311 Series Table 15.
