Intel 40GB X25-V Product Brief
(34nm NAND Flash Memory Product Line)
Solid-State Computing Starts with Intel Inside.® For more information, visit
Intel® X25-V Value SATA Solid-State Drive
40 GB
5 Parallel Channel Architecture with 34nm MLC ONFI 1.0 NAND
Sustained Sequential Read: up to 170 MB/s
Sustained Sequential Write: up to 35 MB/s
65 microseconds
110 microseconds
Random 4 KB Reads: up to 25,000 IOPS
Random 4 KB Writes: up to 2,500 IOPS
SATA I 1.5 Gb/s and SATA II 3.0 Gb/s
2.5¨ Industry Standard Hard Drive Form Factor
9.5 mm height; 68 grams +/- 2 grams weight
1.2 million hours Mean Time Before Failure (MTBF)
Active: 150 mW Typical (PC workload²)
Idle (DIPM): 75 mW Typical (34nm)
1,500 G/0.5 ms (34nm)
0° C to +70° C
SATA Revision 2.6 Compliant. Compatible with SATA II 3.0 Gb/s with Native Command Queuing
and SATA I 1.5 Gb/s interface rates
Meets the requirements of EU RoHS Compliance Directives and the Halogen Free Compliance Directives
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) commands plus additional
Intel solid-state monitoring
40 GB 80 GB 160 GB
• • • • • •
• • • • • • • • •
• • • • • • • • •
•
= Good
• •
= Better
• • •
= Best
(40 GB)
1
Measurement performed on 8 GB span.
2
Active power is measured during execution of MobileMark* 2007 Productivity 2007 benchmark. Drive will initiate DIPM request to the host if idle for 25 msec whether or not standby
or sleep command is received. If DIPM request is acknowledged drive will enter idle power mode.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL
®
PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE,
TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH
PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL
PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT,
COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR
INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions
marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to
them. The information here is subject to change without notice. Do not finalize a design with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current
characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies
of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or by visiting Intel’s Web site
at www.intel.com.
Copyright © 2009 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others. 1209/CLM/HBD/PDF 323039-001US