Datasheet

Supported Intel® Server Boards Intel® Server System SR2500AL
Revision – 1.00
Intel order number D31980-004
78
Description Description
A BIOS Bank Select Jumper V System Fan #2 Header
B Intel
®
6321ESB I/O Controller Hub W CPU Power Connector
C IO Module Option Connector X Main Power Connector
D POST Code Diagnostic LEDs Y Battery
E Intel
®
Adaptive Slot – Full Height Z Power Supply Management Connector
F PCI Express* Riser Slot – Low Profile AA Dual Port USB 2.0 Header
G System Identification LED - Blue BB System Fan #1 Header
H External IO Connectors CC SSI 24-pin Control Panel Header
I Status LED – Green / Amber DD SATA 0
J Serial ‘B’ Port Configuration Jumper EE SATA 1
K System Fan #4 Header FF SATA 2
L System Fan #3 Header GG SATA 3
M FBDIMM Slots HH SATA 4
N Intel
®
5000P Memory Controller Hub (MCH) or
Intel
®
5000X Memory Controller Hub (MCH)
II SATA 5
O CPU #1 Connector JJ SATA SW RAID 5 Activation Key Connector
P CPU #2 Connector KK Intel
®
Remote Management Module (RMM)
Connector
Q CPU #1 Fan Header LL System Recovery Jumper Block
R Voltage Regulator Heat Sink MM Chassis Intrusion Switch Header
S CPU #2 Fan Header NN 3-pin IPMB Header
T Bridge Board Connector OO Intel
®
Local Control Panel Header
U ATA-100 Optical Drive Connector (Power+IO) PP Serial ‘A’ Header
QQ Intel
®
RMM NIC Connector
Figure 50. Intel
®
Server Board S5000PAL Components
9.1.1 Processor Support
The server system supports one or two Dual-Core Intel
®
Xeon
®
processors 5000 sequence, with
system bus speeds of 667 MHz, 1066 MHz, and 1333 MHz, and core frequencies starting at
2.67 GHz. Previous generations of the Intel
®
Xeon
®
processor are not supported on this server
board.
Note: Only Dual-Core Intel
®
Xeon
®
processors 5000 sequence, that support system bus speeds
of 667 MHz, 1066 MHz, and1333 MHz are supported on this server board. See the following
table for a list of supported processors.