Datasheet

Functional Architecture Intel® Server System SR1640TH TPS
Revision 1.0
Intel order number: E94847-001
38
Table 20. Setup Utility – System Acoustic and Performance Configuration Screen Fields
Setup Item Options Help Text Comments
Set Throttling
Mode
Auto
CLTT
OLTT
[Auto] – Auto Throttling mode.
[CLTT] – Closed Loop Thermal Throttling Mode.
[OLTT] – Open Loop Thermal Throttling Mode.
Note: The OLTT
option is shown for
informational
purposes only. If
the user selects
OLTT, the BIOS
overrides that
selection if the
system can support
CLTT. OLTT is
configured only when
UDIMMs without
Thermal Sensors are
installed.
Altitude 300m or less
301m-900m
901m-1500m
Higher than 1500m
[300m or less] (980ft or less)
Optimal performance setting near sea level.
[301m - 900m] (980ft - 2950ft)
Optimal performance setting at moderate elevation.
[901m – 1500m] (2950ft – 4920ft)
Optimal performance setting at high elevation.
[Higher than 1500m] (4920ft or greater)
Optimal performance setting at the highest elevations.
Set Fan Profile
Performance
Acoustics
[Performance] - Fan control provides primary system
cooling before attempting to throttle memory.
[Acoustic] - The system will favor using throttling of
memory over boosting fans to cool the system if
thermal thresholds are met.
This option is grayed
out if CLTT is
enabled.
2.6.5.3 Security Screen
The Securit
y screen allows the user to enable and set the user and administrative password
and to lock out the front panel buttons so they cannot be used.
Trusted Platform Module (TPM) security is NOT supported on the Server Board S3420TH.
To access this screen from the Main screen, select Security.
Main Advanced Security Server Management Boot Options Boot Manager
Administrator Password Status
<Installed/Not Installed>
User Password Status
<Installed/Not Installed>
Set Administrator Password [1234aBcD]
Set User Password [1234aBcD]
Front Panel Lockout Enabled / Disabled
Figure 17. Setup Utility – Security Configuration Screen Display