Datasheet

Intel® Server System SR1640TH TPS Functional Architecture
Revision 1.0 35
Intel order number: E94847-001
Setup Item Options Help Text Comments
SATA Port 0 < Not Installed /
Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
SATA Port 1 < Not Installed /
Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
SATA Port 4 < Not Installed /
Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
SATA Port 5 < Not Installed /
Drive
information>
Information only. This field is
unavailable when RAID Mode is
enabled.
2.6.5.2.4 USB Configuration Screen
The USB Configuration
screen allows the user to configure the USB controller options.
To access this screen from the Main screen, select Advanced > USB Configuration.
Advanced
USB Configuration
Detected USB Devices
<Total USB Devices in System>
USB Controller Enabled / Disabled
Legacy USB Support Enabled / Disabled / Auto
Port 60/64 Emulation Enabled / Disabled
Make USB Devices Non-Bootable Enabled / Disabled
USB Mass Storage Device Configuration
Device Reset timeout 10 seconds / 20 seconds / 30 seconds / 40 seconds
Mass Storage Devices:
<Mass storage devices one line/device> Auto / Floppy/Forced FDD/Hard Disk/CD-ROM
Figure 14. Setup Utility – USB Controller Configuration Screen Display
Table 18. Setup Utility – USB Controller Configuration Screen Fields
Setup Item Options Help Text Comments
Detected USB
Devices
Information only. Shows the number
of USB devices in the system.
USB Controller
Enabled
Disabled
[Enabled] - All onboard USB controllers are turned on and
accessible by the OS.
[Disabled] - All onboard USB controllers are turned off and
inaccessible by the OS.