Specifications

Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide 81
9. Connect the power supply cables to the server board and peripherals. See Figure 63.
— A: 2x4 power connector
— B: 2x12 main power connector
— C: HDD1 power connector, if a hard drive is installed here. Use the connector
on cable that is closest to power supply.
— D: HDD0 power connector, if a hard drive is installed here. Use the center
connector on the cable.
— E: Optical drive power, if an optical drive is installed. Use the end connector on
the power supply.
— F: Power supply management port
.
Figure 63. Connecting Power Cables (SR1630GPRX)
10. Install the server system cover. For instructions, see “Installing the Server System
Cover”.
11. Plug all peripheral devices and the AC power cable into the server.
HDD 0
HDD 1
Optical Device
A
D
G
C
E
CPU
F
L
A
G
CPU
F
L
CPU
A
B
F
AF003376