Specifications

80 Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide
7. Insert the replacement power supply at an angle into the server system, sliding the
power connector side in first to fit it through the cut-out area at the rear of the
system. See letter “C” in Figure 62.
8. Set the front of the power supply down by pushing the power supply back. Insert
and fasten the three screws you removed in Step 5 and Step 6.
Figure 62. Installing Power Supply Module into the Server System
(SR1630GPRX)
A
B
C
AF003396