Specifications

74 Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide
Installing the Server Board
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information”.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover”.
4. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct”.
5. Remove the PCIe* Riser assembly. For instructions, see “Removing the PCIe*
Riser Assembly”.
6. Place the server board into the server system as shown by letter “A” in Figure 58.
7. Attach the server board with nine screws. See letter “B” in Figure 58.
Figure 58. Installing the Server Board
AF003374
A
B