Specifications

70 Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide
Installing and Removing the RMM3 Lite
Installing the RMM3 Lite
1. Remove the PCI riser assembly. For instructions, see “Removing the PCIe* Riser
Assembly”.
2. Position the RMM3 Lite over the server board RMM3 Lite connector (J2D1) as
shown in Figure 55.
Figure 55. Installing the RMM3 Lite to the Server System
3. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCIe* Riser Assembly”.
Removing the RMM3 Lite
1. Remove the PCI riser assembly. For instructions, see “Removing the PCIe* Riser
Assembly”.
2. Disconnect the RMM3 Lite from the server board RMM3 Lite connector (J2D1) as
shown in Figure 56.
RMM3 LITE
Connector
RMM3 LITE