Specifications

68 Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide
Figure 53. Installing the I/O Expansion Module to the Server System
7. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct”.
8. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCIe* Riser Assembly”.
Removing the I/O Expansion Module
1. Remove the PCI riser assembly. For instructions, see “Removing the PCIe* Riser
Assembly”.
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct”.
3. Disconnect the I/O expansion module from the server board connector and the
standoffs and remove the module out of the server system (see letter “A” in
Figure 54).
4. Remove the standoffs from the server board (see letter “B” in Figure 54).
5. Install the I/O expansion module filler panel(s) into the system back panel (see
letter “C” in Figure 54).
1-Socket
I/O Exp. Module
Standoff
Hole
2-Socket
I/O Exp. Module
Server Board
I/O Connector 1
A
B
Snap
Standoff
AF003398