Specifications

Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide 57
Figure 42. Removing the Optical Drive Brackets
8. If you are installing a replacement optical drive, skip the rest of these steps and
instead continue with Step 5 of "Installing a Slimline Optical Drive".
9. Store the brackets for future use.
10. Install the server system cover. For instructions, see “Installing the Server System
Cover”.
Installing or Removing a Slimline Optical Drive
(SR1630HGPRX)
Caution: The optical drive is NOT hot-swappable. Before removing or replacing the optical drive,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
Installing a Slimline Optical Drive (SR1630HGPRX)
Note: The hardware necessary to install your optical drive was shipped to you in a bag labeled
“CD-ROM Assy”.
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information”.
2. Power down the server and unplug all peripheral devices and the AC power cable.
AF000672