Specifications

54 Intel

Server System SR1630GPRX/SR1630HGPRX Service Guide

8. Install the server system cover. For instructions, see “Installing the Server System

Cover”.

9. Plug all peripheral devices and the AC power cable into the server.

Installing or Removing a Slimline Optical Drive

(SR1630GPRX)

Caution: The optical drive is NOT hot-swappable. Before removing or replacing the optical drive,

you must first take the server out of service, turn off all peripheral devices connected to

the system, turn off the system by pressing the power button, and unplug the AC power

cord from the system or wall outlet.

Installing a Slimline Optical Drive

Notes:

• If you are replacing an optical drive, see “Removing a Slimline Optical Drive” for

instructions first. Return to these steps when directed.

1. Observe the safety and ESD precautions at the beginning of this book. See “Safety

Information”.

2. Power down the server and unplug all peripheral devices and the AC power cable.

3. Remove the server system cover. For instructions, see “Removing the Server

System Cover”.

4. First time installation only: Remove the knock-out by rocking it back and forth. See

letter “A” in Figure 38. You cannot reinstall the knock-out.

Figure 38. Removing the Knock-out from the Sheet Metal Panel

AF001174