Specifications

36 Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide
Figure 21. Installing the Processor Air Duct (SR1630HGPRX)
Installing and Removing Memory
Caution: The memory is NOT hot-swappable. Before removing or replacing any memory DIMM,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
The silkscreen on the board for the DIMMs displays DIMM A1, DIMM A2, DIMM B1,
and DIMM B2 starting from the center of the board. See
“Memory” for a discussion of the
memory requirements and options. See “Server System References” for a link to the list of
tested DIMMs.
AF003387