Specifications
Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide 35
Installing the Processor Air Duct
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information”.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover”.
4. Lower the air duct into place, insert the two hooks at the front of the processor air
duct into the corresponding slots on the bracket behind the two system blower fans
(see Figure 20 for SR1630GPRX); see Figure 21 for SR1630HGPRX). Use caution
not to pinch or disengage cables that may be near or under the air duct.
5. Install the server system cover. For instructions, see “Installing the Server System
Cover”.
Figure 20. Installing the Processor Air Duct (SR1630GPRX)
AF003366