Specifications

Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide 33
Figure 17. Installing the Server System Cover (SR1630HGPRX)
7. Reconnect all peripheral devices and the AC power cord.
Removing and Installing the Processor Air Duct
Always operate your server system with the processor air duct in place. The air duct is
required for proper airflow within the server system.
Removing the Processor Air Duct
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information”.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Server
System Cover”.
4. Lift the processor air duct from its location behind the two system blower fans (see
Figure 18 for SR1630GPRX; see Figure 19 for SR1630HGPRX).
AF00157
9
A
B