Specifications
Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide 29
3 Hardware Installations and
Upgrades
Caution: No components in the Intel
®
Server System SR1630GPRX are hot-swappable. Before
removing or installing any component in this server system, you must first take the server
out of service, turn off all peripheral devices connected to the system, turn off the system
by pressing the power button, and unplug the AC power cord from the system or wall
outlet.
Note: Some components in the Intel
®
Server System SR1630HGPRX are hot-swappable and are
noted as such (where applicable) in the following instructions.
Note: Most of the illustrations in this chapter show the Intel
®
Server System SR1630GPRX with
an optional optical drive installed. Unless otherwise noted, the instructions for removing
and installing components are the same for the Intel
®
Server System SR1630HGPRX.
When instructions differ, separate illustrations are shown for the Intel
®
Server System
SR1630HGPRX.
Before You Begin
Before working with your server product, pay close attention to the “Safety Information”.
Tools and Supplies Needed
• Phillips* (cross head) screwdriver, #1 bit and #2 bit
• Antistatic wrist strap and conductive foam pad (recommended)
System References
All references to the left, right, front, top, and bottom assume the reader is facing the front
of the server system as it would be positioned for normal operation.