Specifications

98 Intel
®
Server System SR1630GPRX/SR1630HGPRX Service Guide
Removing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information”.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the two screws holding the rack handle in place, and remove the rack
handle from the server system as shown in Figure 79.
Figure 79. Removing the Rack Handle
4. Repeat Step 4 on the opposite side of the system.
5. Plug all peripheral devices and the AC power cable into the server.
AF001204