Specifications

Intel® Server System SR1630BC Front Control Panel
Revision 1.3
Intel order number E44588-003
29
LED Color State Description
Green Random blink
HDD access
Disk Activity
Off Off
No hard disk activity
The current limiting resistors for the power LED, system fault LED, and NIC LEDs are located
on the Intel
®
Server Board S5500BC.
6.1.1 Power / Sleep LED
Table 19. SSI Power LED Operation
State Power Mode LED Description
Power Off Non-ACPI Off System power is off, and the BIOS has not initialized the chipset.
Power On Non-ACPI On System power is on, but the BIOS has not yet initialized the chipset.
S5 ACPI Off
Mechanical is off, and the operating system has not saved any context
to the hard disk (soft-off state).
S3-S1 ACPI Slow blink
1
DC power is still on. The operating system has saved context and
gone into a level of low-power state (sleep state).
S0 ACPI Steady on System and the operating system are up and running (working state).
Note:
1. The blink rate is ~ 1Hz with at 50% duty cycle.
6.1.2 System Status LED
Table 20. System Status LED Indicator States
Color State Criticality Description
Off N/A Not ready System not ready: Post error/NMI event/PCI or terminator missing
Green Solid on Ok System booted and ready
Green Blink Degraded
System degraded:
 Non-critical temperature threshold asserted.
 Non-critical voltage threshold asserted.
 Non-critical fan threshold asserted.
 Fan redundancy lost, sufficient system cooling maintained. This
does not apply to non-redundant systems.
 Power supply predictive failure.
 Power supply redundancy lost. This does not apply to non-
redundant systems.
 Correctable errors over a threshold of 10 and migrating to a spare
DIMM (memory sparing). This indicates the user no longer has
spared DIMMs indicating a redundancy lost condition.
Corresponding DIMM LED should light up.1