Datasheet

PCI Riser Cards and Assembly Intel® Server System SR1550AL
Revision – 1.3
Intel order number D31982-006
68
The full height riser slot implements Intel
®
Adaptive Slot Technology. This 280-pin connector is
capable of supporting riser cards that meet either the PCI-X* or PCI Express* technology
specifications.
TP02183
Notes:
1. PCB tolerance:
A: 62 mil (1.58 mm) ± 7 mil
B: 93 mil (2.36 mm) ± 9 mil
C: 98 mil (2.49 mm) ± 9 mil
2. If there is needed:
sheet 1: Board profile and mounting hole
2: Pin location
3: Constrain area on both sides
3. No indicated radii should be 2.00 mm
5.00 [0.197]
Ø 4.60
[0.181]
R1.50
[0.1]
Ø 9.00
[0.354]
Pad Side 1 & 2
Detail A
Scale 2:1
Side 2 No Component
See Detail A
Side 2 Comp No Trace
6X R1.00
[0.0]
1st Pin
0.5 X 45˚ 6 Pcs
66.05 [2.600] 66.00 [2.598] 12.15 [0.478]
0.55 [0.022] 1.00 [0.039] 0.70 [0.028]
3.50 [0.138]
Scale 1:2
32.51 [1.280]
30.84 [1.214]
2X 24.71 [0.973]
20.21 [0.796]
12.71 [0.500]
8.40 [0.331]
5.60 [0.220]
0.00 [0.000]
0.00 [0.000] 5.91 [0.233] 17.41 [0.686] 24.52 [0.966] 148.42 [5.843] 153.92 [6.060] 160.28 [6.310]
153.72 [6.052] 153.07 [6.026]
9.52 [0.375]
Figure 45. 1U Full Height PCI-X* Riser Card Mechanical Drawing