Datasheet

Intel® Server System SR1550AL Standard Control Panel

Revision – 1.3

Intel order number D31982-006

8.4 Internal Standard Control Panel Interconnect

All standard control panel signals are directed through a single 50-pin signal connector and 10-

pin USB connector. The standard control panel board is cabled to the hot-swap backplane.

Figure 40. Standard Control Panel PCB

Table 52. 50-Pin Standard Control Panel Signal Connector

Signal Name Pin

Signal Name

1 V_IO_RED_CONN_FP 2 GND

3 V_IO_GREEN_CONN_FP 4 GND

5 V_IO_BLUE_CONN_FP 6 GND

7 V_IO_HSYNC_BUFF_FP_L 8 GND

9 V_IO_VSYNC_BUFF_FP_L 10 GND

11 V_VIDEO_IN_USE 12 FP_THERM_SENSOR

13 SP_DTR2_L 14 SP_DCD2_L

15 SP_RTS2_L 16 SP_CTS2_L

17 SP_SIN2 18 SP_SOUT2

19 SP_DSR2_L 20 SP_IN_USE

21 FP_NMI_BTN_L 22 GND

23 LED_NIC1_ACT_L 24 LED_NIC1_LINK_R_L

25 Not Used 26 FP_CHASSIS_INTRU

27 FP_ID_SW_L 28 SMB_PB1_5VSB_CLK

29 GND 30 SMB_PB1_5VSB_DAT

31 RST_FP_BTN_L 32 LED_NIC2_ACT_L

33 LED_HDD_FLT_R_L 34 LED_NIC2_LINK_R_L

35 FP_PWR_BTN_L 36 LED_FP_ID_R_L

37 SMB_IPMB_5VSB_CLK 38 GND

39 SMB_IPMB_5VSB_DAT 40 PV_HDD_LED_3V_A

41 LED_FP_PWR_R_L 42 FP_FLT_LED_5VSB

43 FP_PWR_LED_5VSB 44 LED_FP_SYS_FLT2_R_L

45 RST_PWRGD_PS 46 LED_FP_SYS_FLT1_R_L

47 LED_HDD_ACT_RR_L 48 P5V

49 P5V_STBY 50 P5V_STBY