Specifications
Intel® Server Board S3420GPRX TPS Functional Architecture
Revision 1.1
Intel order number E92065-001
29
Table 10. RMM3 Lite Advanced Management Features
Advanced Feature Description
KVM Redirection Remote console access via keyboard, video, and mouse redirection over LAN.
USB Media Redirection Remote USB media access over LAN.
WS-MAN Full SMASH profiles for WS-MAN based consoles.
Embedded Web Server Access BMC sensors reading, SEL, power control, enable KVM redirection, etc
The user can access only the RMM3 Lite advanced features from the onboard NIC5, as there is
no dedicated management NIC port (BMC channel 3)
Note: S3420GPRX BMC firmware still contains BMC channel 3 logical interface, but the user
cannot access it as there is no corresponding physical NIC port.
Please refer to the RMM3 user guide for RMM3 Lite operation except for RMM3 Lite NIC port.
3.7 Serial Ports
The server board provides two serial ports: an external RJ45 serial port connector and an
internal DH-10 serial header.
The rear RJ45 serial A-port is a fully-functional serial port that can support any standard serial
device.
The Serial B port is an optional port accessed through a 9-pin internal DH-10 header (J1B1).
The user can use a standard DH-10 to DB9 cable to direct serial A port to the rear of a chassis.
The serial B interface follows the standard RS-232 pin-out as defined in the following table.
3.8 Floppy Disk Controller
The server board does not support a floppy disk controller interface. However, the system BIOS
recognizes USB floppy devices.
3.9 Keyboard and Mouse Support
The server board supports only USB specification-compliant keyboard and mouse.
3.10 Wake-up Control
The super I/O contains functionality that allows various events to power on and power off the
system.
3.11 Video Support
The server board includes a video controller in an on-board Server Engines* Integrated
Baseboard Management Controller along with 64 MB of video DDR2 SDRAM. The SVGA
subsystem supports a variety of modes, up to 1600 x 1200 resolution in 8/16/32 bpp modes
under 2D. It also supports both CRT and LCD monitors up to a 100 Hz vertical refresh rate.