Technical Product Specification

Intel® Server Chassis SC5650 TPS Regulatory, Environmentals, and Specifications
Revision 1.2
Intel order number E39531-004
135
Table 134. System Office Environment Summary
Parameter Limits
Operating temperature 5°C to 40°C
Non-operating temperature -40°C to 70°C
Non-operating humidity 35°C @ 90% RH
Acoustic noise (EPSD
idle/active)*
Workstation: 4.8/5.5 BA; Pedstal: 5.5/6.0 BA; Intel Limit: 7.0 BA
Shock, operating 2g, 11 ms 1/2 Sine, 20g, 2ms, 1/2 Sine
Shock, unpackaged 25G Trapezoidal Shock
Shock, packaged 24" Free Fall, >40, <80lbs; 30" Free Fall, >20, <40lbs
Vibration, unpackaged 5Hz to 500Hz, 2.2 grms random profile
Vibration, packaged 5Hz to 500Hz, 1.09 grms random profile
ESD* 2kV to 12 kV Air Discharge, 2kV to 8kV Contact Discharge
System Cooling Requirement in
BTU/hr
*IMPORTANT NOTE:
With the BIOS set to ‘CLTT’ memory throttling mode and ‘301m-900m’ altitude, the Intel
®
Server Chassis SC5650WS pass the Intel limit (Tower PC with ≥1000W Power Supply capacity) , but do not meet the
EPSD workstation target. The chassis with Intel
®
Server Board S5500BC requires the use of shielded LAN cable to
comply with Immunity regulatory requirements. Use of non shield cables may result in the product having insufficient
immunity electromagnetic effects, which may cause improper operation of the product.
9.8 Serviceability and Availability
This system is designed to be serviced by qualified technical personnel only.
The desired Mean Time To Repair (MTTR) of the system is 30 minutes including diagnosis of
the system problem. To meet this goal, the system enclosure and hardware have been
designed to minimize the MTTR.
Following are the maximum times that a trained field service technician should take to perform
the listed system maintenance procedures, after diagnosis of the system.
Table 135. Mean Time To Repair Estimate
Activity Time Estimate
Remove cover < 1 minute
Remove and replace hard disk drive 1 minute
Remove and replace 5.25-inch peripheral device <1 minute
Remove and replace fixed power supply module <7 minutes
Remove and replace hot-swap power supply module < 1 minute
Remove and replace drive cage fan <1 minute
Remove and replace system fan <2 minute
Remove and replace backplane board <5 minutes
Remove and replace control panel board <4 minutes
Remove and replace server board <15 minutes