Technical Product Specification

Peripheral and Hard Drive Support Intel® Server Chassis SC5650 TPS
Revision 1.2
Intel order number E39531-004
116
Table 126. Power Connector Pin-out
Pin Signal
1 P12V
2 GND
3 GND
4 P5V
4.3.9 Clock Generation and Distribution
The 6HDD SAS/SATA HSBP provides one clock source. A 4-MHz crystal provides clock source
to the VSC410* controller.
4.3.10 7-Pin SAS/SATA Host Connectors
The 6HDD passive SAS/SATA HSBP provides four or six 7-pin SAS/SATA connectors that will
be connected to the host interface of the server board or HBA via a mated cable.
The following table defines the pin-out of the 7-pin SAS/SATA host connector.
Table 127. 7-pin SAS/SATA Connector Pin-out
Connector Contact Number Signal Name
S1 GND
S2 SATA_DRVnA_RX_P
S3 SATA_DRVnA_RX_N
S4 GND
S5 SATA_DRVnA_TX_N
S6 SATA_DRVnA_TX_P
S7 GND
Note:
n=0, 1, 2, 3, 4, 5.
4.3.11 IPMB Header - IPMB
The following table defines the pin-out of the 4-pin IPMB Header. This connector is white in
color.
Table 128. IPMB Header Pin-out
Pin Signal Name Description
1 SMB_5VSTB_IPMB_DAT Data
2 GND GND
3 SMB_5VSTB_ IPMB_CLK Clock
4
SMB_5VSTB_ IPMB_ADDR
IPMI interface address selection. Primary
(Low)= 0xC0, Secondary(High) = 0xC2