Technical Product Specification

Intel® Server Chassis SC5650 TPS Peripheral and Hard Drive Support
Revision 1.2
Intel order number E39531-004
107
4. Peripheral and Hard Drive Support
A. Hard Disk Drive Bay
Figure 27. Drive Bay Locations for Intel
®
Server Chassis SC5650 (DP/WS/BRP configuration
shown)
4.1 3.5-inch Peripheral Drive Bay
The Intel
®
Server Chassis SC5650 supports one 3.5-inch removable media peripheral, such as
a floppy or tape drive, below the 5.25-inch peripheral bays. The bezel must be removed prior to
3.5-inch removable media installation. When a drive is not installed, a snap-in EMI shield must
be in place to ensure regulatory compliance. A cosmetic plastic filler is provided to snap into the
bezel.
The 3.5-inch bay is designed for tool-less insertion and removal so that no screws are required.
On the right side of the chassis, two protrusions in the sheet metal help locate the drive. On the
left side are two levers to lock the drive into place.