Service Guide

Hot Swap Drive Cage Upgrade Install Instructions (optional)
Intel® Server Chassis SC5650-DP/WS/BRP/UP Service Guide 75
Installing a Hot Swap Hard Drive
Note: The following set of instructions is only applicable if you replaced the fixed hard drive
cage that shipped with your chassis with a SAS/SATA hard drive cage. If you are replacing
a fixed hard drive, see “Removing a Fixed Hard Drive” for instructions.
Note: The Intel
®
Server Chassis SC5650 does not support all hard drives. See “Additional
Information and Software”for an Internet link to a list of supported hard drives.
1. Open the drive bay access door.
Figure 90. Opening Drive Bay Access Door
AF000311