Service Guide

Hot Swap Drive Cage Upgrade Install Instructions (optional)

66 Intel® Server Chassis SC5650-DP/WS/BRP/UP Service Guide

13. Align the fan bracket with the three pegs on the drive cage (see letter “A” in the

following figure) and slide the fan bracket into position. Replace the two thumb

screws (see letter “B”).

Caution: The backplane may have slipped once the thumb screws were removed.

Ensure the backplane is positioned correctly before re-tightening the

thumb screws.

Figure 82. Attaching Fan Bracket to Expanded Hot Swap Drive Cage

AF002937