Service Guide

Hot Swap Drive Cage Upgrade Install Instructions (optional)

Intel® Server Chassis SC5650-DP/WS/BRP/UP Service Guide 63

7. Push the blue plastic release mechanism upward to release the fixed hard drive cage

(see letter “A” in the following figure). Once released, pull the fixed hard drive cage

from the chassis (see letter “B”).

Figure 77. Removing Fixed Hard Drive Cage from Chassis (DP/WS/BRP

configuration shown)

8. Gather together the components for the hot swap drive cage installation. You should

have a hot swap drive cage with a SAS/SATA backplane, a side filler panel, a latch

plate, a fan bracket, and a fan.

TP02038