Service Guide

Hardware Installations and Upgrades
56 Intel® Server Chassis SC5650-DP/WS/BRP/UP Service Guide
Figure 71. Attaching Rear Support Bracket to Power Supply Cage
11. Insert new hot swap power supply cage into chassis. Secure back of hot swap power
supply cage to chassis with five screws.
Note: Ensure you route the power supply cables through the power supply opening in the chassis
first before inserting the power supply cage.
Figure 72. Securing Hot Swap Power Supply Cage to Rear of Chassis
12. Secure the inside panel of the hot swap power supply cage to chassis with two screws.
TP01766